{"product_id":"034motorsport-performance-software-ecu-tcu-tuning-bundle-audi-ea837-30-tfsi-4m-q7","title":"034Motorsport Performance Software ECU \u0026 TCU Tuning Bundle - Audi EA837 3.0 TFSI 4M Q7","description":"\u003cp\u003e034Motorsport Dynamic+ Performance Software for the Supercharged Audi 4M Q7 equipped with the EA837 3.0TFSI CREC engine and Dynamic+ TCU Software Upgrade for AL552 ZF8 Transmission is flashed directly through the factory OBD-II port using the 034Motorsport Dynamic+ End User Flashing Kit, and offer dramatic increases in horsepower and torque throughout the powerband. The result is a significant improvement in acceleration and throttle response, without any sacrifice in drivability or reliability.\u003cbr\u003e\u003cbr\u003eDynamic+ Performance is optimized for keeping up with the unique demands of your Audi Q7 - ensuring that whether you're towing, hauling cargo, or driving the family around, your vehicle delivers smooth, reliable power. With a focus on enhancing drivability and efficiency, Dynamic+ Tuning maintains the safety and comfort you expect during everyday activities in your luxury SUV. Enjoy improved throttle response and acceleration without sacrificing reliability, perfect for any Q7 owner balancing performance with practicality.\u003cbr\u003e\u003cbr\u003eIncluded at an additional cost is the Stage 1 Dynamic+ Performance TCU Software, required to safely unlock the full performance from your ECU tune and further enhance the shifting and acceleration of your ZF8 equipped 3.0T! Flashed directly through your vehicle’s OBD-II port to the Simos 16 ECU, 034Motorsport’s proprietary calibrations for the AL552 TCU safely and effectively raise the torque limits of the ZF8, safely and effectively optimizing operation for Stage 1 \u0026amp; 2 Dynamic+ Performance ECU Software.\u003c\/p\u003e\n\u003cp\u003e034Motorsport Engineers develop special inhouse tools that allow us to access the firmware and maps inside the factory ECU, this level of engineering is required to prevent work-arounds and bandaids that many aftermarket companies resort to. 034Motorsport engineers and optimizes the ECU calibrations just like Audi engineers would, but accessing the source of how the ECU controls the engine and making changes at the base level.\u003c\/p\u003e\n\u003cp\u003eThis is the ONLY way 034Motorsport can ensure our calibrations meet our high standards for ultimate power with smooth drivability, perfect function, reliability and added functions and features even beyond what the factory programming can provide.\u003c\/p\u003e\n\u003cp\u003e034Motorsport's 3.0 TFSI (Simos 16) Performance Software was developed entirely in-house on a 2017 Audi Q7 3.0 TFSI. The calibrations were then refined on multiple enthusiast-owned vehicles before release.\u003c\/p\u003e\n\u003ch3\u003eWhy is AL552 ZF8 TCU Software necessary on the CREC EA837 3.0T?\u003c\/h3\u003e\n\u003cp\u003eAs with any automatic transmission vehicle, the ECU and TCU computers work synchronously to properly apply torque to the vehicles drivetrain in a safe and reliable manner. Within both the ECU and TCU, there are factory safety tables that limit overall torque output based upon what the factory first tuned the car for. The ECU reports the output of torque from the engine to the TCU, and the TCU decides if this is suitable, or too much. If it is too much, the TCU will command the ECU to reduce torque output based upon its safety tables.\u003cbr\u003e\u003cbr\u003e034Motorsport takes a holistic approach with its Dynamic+ tuning, and aims to retain as many OEM safety protocols as possible. While it is possible to tune around the factory TCU torque limiters from the ECU side, this is done at the expense of torque safety features that are integral in keeping your transmission running safely. 034Motorsport’s calibrators tune the ECU to work with the TCU to provide accurate torque values, and recalibrate the appropriate safety ranges for the TCU. Taking these extra steps to retain OEM safety systems on the ECU and TCU side is just one of the many reasons that Dynamic+ software provides substantial yet reliable performance increases.\u003c\/p\u003e\n\u003ccenter\u003e\n\u003ch3\u003e034SPI Mobile Flashing Phone App\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0005\/7773\/2663\/files\/release_trial_blank_5_63b86b88-03a8-4302-8908-1c493fc30830.jpg?v=1729710443\" alt=\"\"\u003e\u003cbr\u003e\n\u003c\/h3\u003e\n\u003c\/center\u003e\n\u003cdiv class=\"col-2\"\u003e\n\u003cdiv class=\"col2-set\"\u003e\n\u003cdiv class=\"col-1\"\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-2\"\u003e\n\u003cp\u003eAll Dynamic+ tunes can now be flashed anywhere you please with the 034SPI (Smartphone Interface) Mobile Flashing application!\u003cbr\u003e\u003cbr\u003eDesigned for use on iOS and Android Devices as well as Apple Silicon-equipped laptops (M1, M2, M3), 034SPI allows you to easily flash your car, change fuel maps, configure live data displays, record and submit data logs to 034Motorsport's Tuning Support team, and utilize diagnostic support tools such as DTC\/CEL code read\/clear and more! Available now for use with any Dynamic+ ECU or TCU tune and the latest R4 Dynamic+ End User Flashing Dongle (May 2023 \u0026amp; Newer)! Download via the Apple App Store or Google Play Store Today!\u003ca href=\"https:\/\/www.034motorsport.com\/blog\/download-now-034spi-mobile-flashing-phone-app\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cstrong\u003eDetailed Flashing Features:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003eComplete Any ECU Or TCU Tune Flash\u003c\/li\u003e\n\u003cli\u003eQuickly Flash Different Fuel Octane Or Transmission Files\u003c\/li\u003e\n\u003cli\u003eFlash ECU\/TCU Using Mobile Device's Internet Connection\u003c\/li\u003e\n\u003cli\u003eEnhanced Flashing Protocol Protections For Increased Flashing Stability\u003c\/li\u003e\n\u003cli\u003eUser-Configurable Live Data Displays\u003c\/li\u003e\n\u003cli\u003eMultiple Data Display Views\u003c\/li\u003e\n\u003cli\u003eDozens Of Defined Variables Available\u003c\/li\u003e\n\u003cli\u003eHigh-Speed Datalogging Of Pre-Defined Variables\u003c\/li\u003e\n\u003cli\u003eEasy Upload Of Logs To 034Motorsport Server\u003c\/li\u003e\n\u003cli\u003eDatalog Analysis Services Available Free Of Charge\u003c\/li\u003e\n\u003cli\u003eRead \u0026amp; Clear DTCs On ECU \u0026amp; TCU\u003c\/li\u003e\n\u003cli\u003eView Emissions Monitor Statuses\u003c\/li\u003e\n\u003cli\u003ePerform Adaptations\/Recalibrations*\n\u003cul\u003e\n\u003cli\u003e*Available for limited platforms, coverage expanding regularly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ccenter\u003e\n\u003ch3\u003e034Motorsport 3.0 TFSI (CREC) Performance Software Comparison:\u003c\/h3\u003e\n\u003c\/center\u003e\n\u003cdiv\u003e\n\u003ctable class=\"tuning-application-table\" cellspacing=\"0\" cellpadding=\"2px\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eStage\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eFuel\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eMax HP\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eMax TQ\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eMax HP Gain\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eMax TQ Gain\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eRev Limiter*\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eSpeed Limiter\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStock\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e91 Oct (AKI)\u003c\/td\u003e\n\u003ctd\u003e335 HP\u003c\/td\u003e\n\u003ctd\u003e336 TQ\u003c\/td\u003e\n\u003ctd\u003eNA\u003c\/td\u003e\n\u003ctd\u003eNA\u003c\/td\u003e\n\u003ctd\u003e6,400 RPM\u003c\/td\u003e\n\u003ctd\u003e150 MPH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStage 1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e91 Oct (AKI)\u003c\/td\u003e\n\u003ctd\u003e439 HP\u003c\/td\u003e\n\u003ctd\u003e402 TQ\u003c\/td\u003e\n\u003ctd\u003e112 HP @ 6,200 RPM\u003c\/td\u003e\n\u003ctd\u003e95 TQ @ 6,200 RPM\u003c\/td\u003e\n\u003ctd\u003e7,400 RPM\u003c\/td\u003e\n\u003ctd\u003e∞\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStage 1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e93 Oct (AKI)\u003c\/td\u003e\n\u003ctd\u003e464 HP\u003c\/td\u003e\n\u003ctd\u003e414 TQ\u003c\/td\u003e\n\u003ctd\u003e131 HP @ 6,200 RPM\u003c\/td\u003e\n\u003ctd\u003e111 TQ @ 6,200 RPM\u003c\/td\u003e\n\u003ctd\u003e7,400 RPM\u003c\/td\u003e\n\u003ctd\u003e∞\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStage 1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 Oct (AKI)\u003c\/td\u003e\n\u003ctd\u003e491 HP\u003c\/td\u003e\n\u003ctd\u003e425 TQ\u003c\/td\u003e\n\u003ctd\u003e157 HP @ 6,200 RPM\u003c\/td\u003e\n\u003ctd\u003e130 TQ @ 6,200 RPM\u003c\/td\u003e\n\u003ctd\u003e7,400 RPM\u003c\/td\u003e\n\u003ctd\u003e∞\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStage 1\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eE85 Pump (E60-E85)\u003c\/td\u003e\n\u003ctd\u003e504 HP\u003c\/td\u003e\n\u003ctd\u003e427 TQ\u003c\/td\u003e\n\u003ctd\u003e159 HP @ 6,200 RPM\u003c\/td\u003e\n\u003ctd\u003e134 TQ @ 6,200 RPM\u003c\/td\u003e\n\u003ctd\u003e7,400 RPM\u003c\/td\u003e\n\u003ctd\u003e∞\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStage 2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e91 Oct (AKI)\u003c\/td\u003e\n\u003ctd\u003e471 HP\u003c\/td\u003e\n\u003ctd\u003e442 TQ\u003c\/td\u003e\n\u003ctd\u003e151 HP @ 6,200 RPM\u003c\/td\u003e\n\u003ctd\u003e128 TQ @ 6,200 RPM\u003c\/td\u003e\n\u003ctd\u003e7,400 RPM\u003c\/td\u003e\n\u003ctd\u003e∞\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStage 2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e93 Oct (AKI)\u003c\/td\u003e\n\u003ctd\u003e491 HP\u003c\/td\u003e\n\u003ctd\u003e454 TQ\u003c\/td\u003e\n\u003ctd\u003e168 HP @ 6,200 RPM\u003c\/td\u003e\n\u003ctd\u003e142 TQ @ 6,200 RPM\u003c\/td\u003e\n\u003ctd\u003e7,400 RPM\u003c\/td\u003e\n\u003ctd\u003e∞\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStage 2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 Oct (AKI)\u003c\/td\u003e\n\u003ctd\u003e522 HP\u003c\/td\u003e\n\u003ctd\u003e471 TQ\u003c\/td\u003e\n\u003ctd\u003e194 HP @ 6,200 RPM\u003c\/td\u003e\n\u003ctd\u003e165 TQ @ 6,200 RPM\u003c\/td\u003e\n\u003ctd\u003e7,400 RPM\u003c\/td\u003e\n\u003ctd\u003e∞\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStage 2\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eE85 Pump (E60-E85)\u003c\/td\u003e\n\u003ctd\u003e575 HP\u003c\/td\u003e\n\u003ctd\u003e498 TQ\u003c\/td\u003e\n\u003ctd\u003e236 HP @ 6,200 RPM\u003c\/td\u003e\n\u003ctd\u003e200 TQ @ 6,200 RPM\u003c\/td\u003e\n\u003ctd\u003e7,400 RPM\u003c\/td\u003e\n\u003ctd\u003e∞\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStage 2+\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e91 Oct (AKI)\u003c\/td\u003e\n\u003ctd\u003e*Coming Soon*\u003c\/td\u003e\n\u003ctd\u003e*Coming Soon*\u003c\/td\u003e\n\u003ctd\u003e*Coming Soon*\u003c\/td\u003e\n\u003ctd\u003e*Coming Soon*\u003c\/td\u003e\n\u003ctd\u003e7,400 RPM\u003c\/td\u003e\n\u003ctd\u003e∞\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStage 2+\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e93 Oct (AKI)\u003c\/td\u003e\n\u003ctd\u003e*Coming Soon*\u003c\/td\u003e\n\u003ctd\u003e*Coming Soon*\u003c\/td\u003e\n\u003ctd\u003e*Coming Soon*\u003c\/td\u003e\n\u003ctd\u003e*Coming Soon*\u003c\/td\u003e\n\u003ctd\u003e7,400 RPM\u003c\/td\u003e\n\u003ctd\u003e∞\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStage 2+\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e100 Oct (AKI)\u003c\/td\u003e\n\u003ctd\u003e*Coming Soon*\u003c\/td\u003e\n\u003ctd\u003e*Coming Soon*\u003c\/td\u003e\n\u003ctd\u003e*Coming Soon*\u003c\/td\u003e\n\u003ctd\u003e*Coming Soon*\u003c\/td\u003e\n\u003ctd\u003e7,400 RPM\u003c\/td\u003e\n\u003ctd\u003e∞\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eStage 2+\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eE85 Pump (E60-E85)\u003c\/td\u003e\n\u003ctd\u003e*Coming Soon*\u003c\/td\u003e\n\u003ctd\u003e*Coming Soon*\u003c\/td\u003e\n\u003ctd\u003e*Coming Soon*\u003c\/td\u003e\n\u003ctd\u003e*Coming Soon*\u003c\/td\u003e\n\u003ctd\u003e7,400 RPM\u003c\/td\u003e\n\u003ctd\u003e∞\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\n\u003cp\u003e\u003cem\u003e**Some octane variants are fully developed but have not yet undergone our dyno data colection process and as such the peak increases and power numbers are not yet listed, but you can expect similar gains to the difference of the octanes we have provided the full data collection and dyno information for.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e***All octane ratings are in US standard AKI (RON+MON). Some ROW countries such as the UK use a RON octane rating that differs from US Octane ratings. Please email tuning@034motorsport.com to ensure you are running the correct octane file for your area. Running the incorrect octane file for your fuel can result in irreversible damage.\u003c\/em\u003e\u003c\/p\u003e\n\u003ccenter\u003e\n\u003ch3\u003eECU Software Features:\u003c\/h3\u003e\n\u003c\/center\u003e\n\u003cdiv class=\"icon-container\"\u003e\n\u003cul\u003e\n\u003cli class=\"item\"\u003eIncreased Horsepower \u0026amp; Torque Throughout the Powerband\u003c\/li\u003e\n\u003cli class=\"item\"\u003eImproved Acceleration Times\u003c\/li\u003e\n\u003cli class=\"item\"\u003eAvailable in 91, 93, 100, and E85 Octane Calibrations for All Stages\u003c\/li\u003e\n\u003cli class=\"item\"\u003eTrack-Tested Calibrations Ensure Consistent Power Delivery\u003c\/li\u003e\n\u003cli class=\"item\"\u003eRefined Throttle Mapping for Enhanced Throttle Response \u0026amp; Precision\u003c\/li\u003e\n\u003cli class=\"item\"\u003eRaised RPM Limit to 7,200-7,600 for Broader Powerband\u003c\/li\u003e\n\u003cli class=\"item\"\u003eSpeed Limiter Removed for Increased Top Speed\u003c\/li\u003e\n\u003cli class=\"item\"\u003eFlashed Directly Via the Factory OBD-II Port\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch3\u003e\n\u003cbr\u003eTHERMAL MANAGEMENT SAFETY STRATEGIES:\u003c\/h3\u003e\n\u003cp\u003eWith increased power, comes increased heat. With increased heat, comes the need for additional management. For charge air temperature, 034Motorsport has implemented key safety features to keep your engine running optimally and safely in virtually any condition - just like the OEM calibration. Substantial effort was spent on balancing the trade off of charge temp for power, and improving the compressor efficiency so that it doesn't generate too much charge temp.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCharge Air Temp:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eWhen the charge temp exceeds 75*C there is a reduction in power output to limit the charge temp from going higher. This charge temp limitation is there to prevent knock events, which can severely damage a motor. With these safety measures in place, you can confidently drive your car, from the top of Pikes Peak to Death Valley, knowing the factory ECU has optimal performance and safety covered. When the vehicle is on, the supercharger coolant pump will run at 100% duty cycle to ensure your charge temps stay with an optimal range.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCoolant Temp\/Fan Strategy:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eFrom the factory, Audi likes to run hotter water temps to reduce fluid friction losses from cooler, more viscous oil. While better for efficiency, this strategy becomes a safety issue when loads and heat are increased. 034Motorsport calibrators have rescaled the coolant temperature targets and fan control strategies to target lower coolant temperatures when in higher heat conditions, allowing the car to run within a safe heat range rescaled for the added heat that comes from tuning the engine. Once again, this means that 034Motorsport calibrators have kept your confidence in safety fully intact from the OEM configuration.\u003c\/p\u003e\n\u003cdiv class=\"col2-set\"\u003e\n\u003cdiv class=\"col-1\"\u003e\n\u003ch3\u003eFUEL SYSTEM OPTIMIZATION:\u003c\/h3\u003e\n\u003cp\u003eWhile E85 provides substantial increases in power, it requires about 30% more fuel than standard pump gasoline per ignition cycle. Utilizing a variety of fuel stratified injection strategies, 034Motorsport calibrators have further optimized the factory fueling system to be able to adequately support full E85 on factory hardware for Stage 1 \u0026amp; 2.\u003c\/p\u003e\n\u003ch3\u003eSTART\/STOP FUNCTIONALITY:\u003c\/h3\u003e\n\u003cp\u003eThe Dynamic+ Tuning options for the EA837 3.0T all retain the Start\/Stop engine functionality, but allow users to set memory for the system based upon preference. If you do not want the Start\/Stop system to run, turn it off via the in-cabin button and the car will store that selection even after key cycling the car. If you would like it to stay on, select it to be on via the in-cabin button. This is done in a completely OEM fashion, helping enhance the overall experience of driving your car!\u003c\/p\u003e\n\u003ch3\u003eFREE REVVING IN NEUTRAL AND PARK:\u003c\/h3\u003e\n\u003cp\u003eThe lower stationary rev-limiter is now removed while in Neutral and Park. Impress friends and annoy those around you with limitless ease!\u003c\/p\u003e\n\u003ch3\u003eLocked Supercharger Clutch Support:\u003c\/h3\u003e\n\u003cp\u003e034Motorsport offers files that support the locking of the factory CAS (Clutch Actuated Supercharger) system for all stages. At both stock \u0026amp; higher power levels, this CAS system can fail prematurely, causing reduced power output and error codes. While Audi implemented a clutched supercharger to help improve fuel efficiency for light load driving to reduce drivetrain losses, this can come at a detriment to increased performance.\u003cbr\u003e\u003cbr\u003e034Motorsport offers files that support the\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.034motorsport.com\/034motorsport-billet-crec-supercharger-clutch-delete-kit.html\" target=\"_blank\"\u003e034Motorsport Billet CREC Supercharger Clutch Delete Kit\u003c\/a\u003e, allowing you to delete the factory CAS system for improved performance. Additionally, the factory supercharger clutch system can have clunky engagement \u0026amp; disengagement, causing poor drivability and throttle response.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-2\"\u003e\u003cpicture\u003e\u003csource sizes=\"(max-width: 320px) 320px, (max-width: 480px) 480px, (max-width: 768px) 768px, (max-width: 1024px) 1024px, 1200px\" srcset=\"https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/fishpig\/resp\/wysiwyg\/_SED0216-1024x1024.webp 1024w, https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/fishpig\/resp\/wysiwyg\/_SED0216-768x768.webp 768w, https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/fishpig\/resp\/wysiwyg\/_SED0216-480x480.webp 480w, https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/fishpig\/resp\/wysiwyg\/_SED0216-320x320.webp 320w, https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/wysiwyg\/_SED0216.webp 1200w\" type=\"image\/webp\"\u003e\u003cimg src=\"https:\/\/www.034motorsport.com\/media\/wysiwyg\/_SED0216.jpg\" sizes=\"(max-width: 320px) 320px, (max-width: 480px) 480px, (max-width: 768px) 768px, (max-width: 1024px) 1024px, 1200px\" srcset=\"https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/_SED0216-1024x1024.jpg 1024w, https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/_SED0216-768x768.jpg 768w, https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/_SED0216-480x480.jpg 480w, https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/_SED0216-320x320.jpg 320w, \/media\/wysiwyg\/_SED0216.jpg 1200w\"\u003e\u003c\/picture\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ccenter\u003e\n\u003ch3\u003eAL552 8-Speed ZF8 TCU Tune Features\u003c\/h3\u003e\n\u003c\/center\u003e\n\u003ch3\u003eImproved Torque Management:\u003c\/h3\u003e\n\u003cp\u003eRequired to safely unlock the full performance from your ECU tune, 034Motorsport’s proprietary calibrations for the AL552 TCU safely and effectively optimize its operation for Stage 1, Stage 2, or Stage 2+ Dynamic+ Performance ECU Software. As with any automatic transmission vehicle, the ECU and TCU computers work synchronously to properly apply torque to the vehicle's drivetrain in a safe and reliable manner. Within both the ECU and TCU, there are factory safety tables that limit overall torque output based upon what the factory first tuned the car for. The ECU reports the output of torque from the engine to the TCU, and the TCU decides if this is suitable, or too much. If it is too much, the TCU will command the ECU to reduce torque output based upon its safety tables.\u003cbr\u003e\u003cbr\u003e034Motorsport takes a holistic approach with its Dynamic+ Tuning, and aims to retain as many OEM safety protocols as possible. While it is possible to tune around the factory TCU torque limiters from the ECU side, this is done at the expense of torque safety features that are integral in keeping your transmission running safely. 034Motorsport’s calibrators tune the ECU to work with the TCU to provide accurate torque values, and recalibrate the appropriate safety ranges for the TCU. Taking these extra steps to retain OEM safety systems on the ECU and TCU side is just one of the many reasons that Dynamic+ software provides substantial yet reliable performance increases.\u003c\/p\u003e\n\u003ch3\u003eOptimized Shift Points:\u003c\/h3\u003e\n\u003cp\u003eIn order to take advantage of the increased powerband from the supercharger, Dynamic+ Tuning optimizes the shift points in Drive \u0026amp; Sport Mode to maximize acceleration while retaining smooth drivability.\u003c\/p\u003e\n\u003ch3\u003eKickdown Switch Disabled in Manual Mode:\u003c\/h3\u003e\n\u003cp\u003eWhen in Manual mode, you no longer need to worry about accidentally pushing through the kickdown switch on the throttle pedal!\u003c\/p\u003e\n\u003ch3\u003eImproved Shift Speeds:\u003c\/h3\u003e\n\u003cp\u003eTo further enhance the acceleration of your Audi, the ZF8 shift times are dramatically decreased in all driving modes, which ultimately results in quicker acceleration.\u003cbr\u003e\u003cbr\u003eShift pressures are also increased in Sport Mode to maximize performance. In Sport Mode, you will notice less lazy shifts, more firm shifts, which ultimately results in quicker acceleration.\u003c\/p\u003e\n\u003ch3\u003eAMAX Shifting:\u003c\/h3\u003e\n\u003cp\u003eAMAX Shifting is a shifting strategy that stands for “Acceleration Maximum.” These gear shifts are the fastest and quickest possible for optimal acceleration . These are activated in shifting after launching your vehicle from a stop using launch control.\u003cbr\u003e\u003cbr\u003eThe Q7 has AMAX now activated in the 4-5, 5-6, and 6-7 shifts where it was previously disabled from the factory.\u003c\/p\u003e\n\u003ccenter\u003e034MOTORSPORT 3.0 TFSI (CREC) ECU STAGE DESCRIPTIONS:\u003c\/center\u003e\n\u003cdiv class=\"col2-set\"\u003e\n\u003cdiv class=\"col-1\"\u003e\n\u003ch3\u003e3.0 TFSI (CREC) Stage 1:\u003c\/h3\u003e\n\u003cp\u003e034Motorsport Stage 1 Performance Software for the 4M Q7 3.0 TFSI is engineered to safely increase horsepower and torque with no hardware modifications required. 034Motorsport's proprietary calibrations increase boost by controlling the supercharger bypass, while optimizing timing and fueling maps in the Simos 16 ECU to extract additional power from the 3.0 TFSI engine.\u003c\/p\u003e\n\u003cp\u003eIn addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttle modulation, for further control of the vehicle when driving on track.\u003c\/p\u003e\n\u003cp\u003e034Motorsport 3.0 TFSI CREC Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 1 is available in 91 Octane, 93 Octane, 100 Octane, and E85 Octane files. ALL FILES ARE US (MON+RON) RATING, ROW OCTANE RATINGS MAY DIFFER.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-2\"\u003e\n\u003ch3\u003e3.0 TFSI (CREC) Stage 2:\u003c\/h3\u003e\n\u003cp\u003e034Motorsport Stage 2 Performance Software for the 4M Q7 3.0 TFSI is engineered to further increase horsepower and torque output over Stage 1 levels with the addition of a 179mm or 190mm Crankshaft Supercharger Pulley Upgrade. The 179mm or 190mm Crankshaft Supercharger Pulley Upgrade allows for increased boost pressure from the factory Eaton TVS1320 Supercharger throughout the powerband, while 034Motorsport's proprietary calibrations safely yield additional power from the 3.0 TFSI engine. With high supercharger pulley ratios, the factory CAS (Clutch Acuated Supercharger) system can fail prematurely. By removing the factory clutch and upgrading to the 034Motorsport CREC Supercharger Clutch Delete, owners are able to experience reliable and consistent power, without worry of the factory supercharger clutch slipping.\u003c\/p\u003e\n\u003cp\u003eIn addition to power improvements, 034Motorsport's engineers spent a significant amount of time refining the throttle mapping in both Dynamic and Comfort modes to provide improved throttle response and allow for more precise throttle modulation, for further control of the vehicle when driving on the street or track.\u003c\/p\u003e\n\u003cp\u003e034Motorsport 3.0 TFSI CREC Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 2 is available in 91 Octane, 93 Octane, 100 Octane, and E85 Octane files. With advanced control over the SIMOS 16 ECU and fueling system, 034Motorsport engineers were able to easily run full E85 on the stock fueling system for the demands of Stage 2. ALL FILES ARE US (MON+RON) RATING, ROW OCTANE RATINGS MAY DIFFER.\u003c\/p\u003e\n\u003ch3\u003e3.0 TFSI (CREC) Stage 2+:\u003c\/h3\u003e\n\u003cp\u003e034Motorsport Stage 2+ Performance Software for the 4M Audi Q7 3.0T CREC is engineered to deliver substantial increases in horsepower and torque over Stage 2 levels, achieved with the addition of 034Motorsport’s 179mm or 190mm Lower Crank Pulley in combination with our upper pulley. Alternatively, the 207mm Crank Pulley can be paired with the factory upper pulley to reach the same Stage 2+ pulley ratio. These pulley upgrades allow the factory Eaton TVS1320 Supercharger to generate higher boost levels across the powerband, while 034Motorsport’s proprietary calibrations extract safe, reliable power from the 3.0T CREC engine.\u003c\/p\u003e\n\u003cp\u003eWith high supercharger pulley ratios, the factory CAS (Clutch Acuated Supercharger) system can fail prematurely. By removing the factory clutch and upgrading to the 034Motorsport CREC Supercharger Clutch Delete, owners are able to experience reliable and consistent power without worry of the factory supercharger clutch slipping.\u003c\/p\u003e\n\u003cp\u003eStage 2+ Performance Software also raises the redline to 7,200 RPM, extending the usable powerband and producing greater peak horsepower than the stock 7,000 RPM limit. Beyond the gains in power, throttle mapping has been carefully refined in both Dynamic and Comfort drive modes to improve response and provide more precise throttle modulation. Stage 2+ also enables left-foot braking, giving drivers greater control of the Q7’s dynamics under spirited driving.\u003c\/p\u003e\n\u003cp\u003eDespite these performance gains, the Q7 remains a comfortable and highly capable SUV. Stage 2+ retains full factory-like drivability, meaning your Q7 still handles everyday tasks—whether it’s grocery runs, school drop-offs, long road trips, or even towing—without compromise. Even with the increased performance of Stage 2+, fuel economy is not negatively impacted during regular driving (assuming you have enough self-control to stay out of the throttle!). The added power only enhances versatility, giving your Q7 the performance of a true sport SUV while preserving the refinement and practicality expected from Audi.\u003c\/p\u003e\n\u003cp\u003e034Motorsport 3.0 TFSI Performance Software is flashed via the factory OBD-II port, and does not require any physical modification of the factory ECU. Stage 2+ is available in 91 and 93 Octane, with E85 coming soon. ALL FILES ARE US (MON+RON) RATING, ROW OCTANE RATINGS MAY DIFFER\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"034 Motorsport Tunes","offers":[{"title":"ECU Stage 1 \/ TCU Stage 1 (REQUIRED)","offer_id":46215603290274,"sku":"034-103-2941-034-103-2571","price":1370.3,"currency_code":"CAD","in_stock":true},{"title":"ECU Stage 2 \/ TCU Stage 1 (REQUIRED)","offer_id":46215603323042,"sku":"034-103-2942-034-103-2571","price":1512.3,"currency_code":"CAD","in_stock":true},{"title":"ECU Stage 2+ \/ TCU Stage 1 (REQUIRED)","offer_id":46215603355810,"sku":"034-103-2943-034-103-2571","price":1654.3,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/034motorsport-dynamic-plus-perfo_ba772db0-ee93-45d3-8e81-ef0ff61f835a.jpg?v=1761160798","url":"https:\/\/broxtuning.ca\/products\/034motorsport-performance-software-ecu-tcu-tuning-bundle-audi-ea837-30-tfsi-4m-q7","provider":"Brox Tuning","version":"1.0","type":"link"}