{"title":"Audi A6 C8 (2019+) 3.0T V6","description":"","products":[{"product_id":"apr-high-pressure-fuel-pump-rebuild-kit-2-9t-and-3-0t-ea839-2017","title":"APR High Pressure Fuel Pump Rebuild Kit - 2.9T AND 3.0T EA839 2017+","description":"\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003eThe APR High Pressure Fuel Pump (HPFP) increases maximum volume of fuel the HPFP can deliver by 37% over stock! In doing so, the direct injection fueling system is capable of satisfying fueling requirements set forth by high horsepower setups. This is accomplished by increasing the displacement of the pump using high quality components to exacting tolerances. On the B9 2.9T we achieved an additional 37 AWHP and 50 AWFTLBS over our Stage 1 (E85) ECU Upgrade by adding the pump and running our Stage 1+ (E85) ECU Upgrade! How the direct injection system works: A low pressure fuel pump (LPFP) in the fuel tank delivers fuel to the high pressure fuel pump (HPFP) at roughly 4 to 6 bar. Fuel pressure is then bumped up to a maximum of 200 bar, depending on factory parts, with the HPFP. Finally, high pressure fuel is delivered to the injectors, which spray directly into the cylinders. The problem: The volume of fuel the HPFP pump can displace is directly tied to the displacement of the pump (Internal bore size, and camshaft dictated stroke), and engine speed. The pump is driven off of a lobe on the camshaft. Larger turbocharger systems, and ethanol usage are capable of taxing this system, especially in the mid to lower RPM range where fuel volume is lower. The APR solution: We dramatically increase the volume of fuel the HPFP can displace at every RPM by increasing the displacement of the HPFP. This is accomplished by increasing the bore diameter of the pump's internal pressurizing cylinder. It's important to understand, despite the name, a HPFP upgrade is not necessary designed to increase the engine's fuel rail pressure. The primary goal is to increase the volume of fuel available, which will keep fuel pressure steady even in the most demanding of situations! High quality components and extreme tolerances: The HPFP internals must be machined to extreme tolerances and installed in a clean environment or the pump can easily fail. Dimensional tolerances on the APR HPFP are as tight as .00004\" and geometric tolerances are as tight as .00005\". The plunger and barrel are created from certified and heat-treated bearing-grade stainless steel and the plunger undergoes a special diamond like coating process for exceptional surfaces hardness and ultra-reliable operation. To prevent float associated with altering the plunger's mass, APR supplies each unit with a properly specified spring. All necessary internal seals are replaced. Internal testing: All APR HPFPs are assembled in house under strict assembly guidelines. Each pump is then tested on our test rig to ensure the pumps operate as designed. This step is important for several reasons. It's critical in determining if a pump has a failure from incorrect install, a leaking seal, or a bad solenoid. Secondly, a seized pump on the vehicle at startup can cause damage to the engine's camshaft. By testing each pump, we all but eliminate these possibility. Proven track record: APR pioneered HPFP upgrades in the early days of VAG direct injection engines. Soon after, APR became an OEM supplier of HPFP and GDI components to VAG for use in various race cars, racing series, project cars, and concept vehicles. The APR HPFP has been at the center of countless motorsport victories across the globe and has operated with a nearly perfect tract record since the program's motorsport backed inception in 2006. With tens of thousands of pumps sold, APR has a wealth of knowledge, and manufacturing expertise necessary to deliver a product that will and has stood the test of time. This kit rebuilds your factory pump. A working pump is required. Pump rebuilds are applicable to the Hitachi Gen III pump found on the 2.9T and 3.0T EA839 V6.\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDramatically increases the volume of fuel displaced by the HPFP by 37%\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e+37 AWHP \/ +50 AWFTLS (B9 2.9T E85 Stage 1 vs 1+ with HPFP)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaintains higher pressures under demanding situations\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIdeal for high output race cars and track use\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFully rebuilt in house\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFully machine tested and broken in before shipping\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRebuild of your existing pump\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUpgraded and weight matched spring\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTitanium retainer\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDLC coated piston\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeat-treated bearing-grade stainless steel material\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e.00004\" dimensional tolerances\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e.00005\" geometrical tolerances\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APR","offers":[{"title":"Default Title","offer_id":41035284545698,"sku":"MS100211","price":989.93,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/ms100211_001.jpg?v=1646856074"},{"product_id":"spc-adjustable-control-arm-kit-audi-c8-a6-s6-rs6-b9-q5-sq5-q7-sq7-q8-rsq8","title":"SPC Adjustable Control Arm Kit - Audi \/ C8 A6 \/ S6 \/ RS6 \/ B9 Q5 \/ SQ5 \/ Q7 \/ SQ7 \/ Q8 \/ RSQ8","description":"\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003eUse these adjustable upper control arms from SPC to get ±1.5˚ Camber and\/or Caster change on newer Audis. Whether you want to reduce tire wear or set your front caster and camber where you want it for the track, you will need these arms to make easy on-car adjustments. Engineered for both street and track use, maintenance free ball joints and bushings provide factory ride, handling, and Noise Vibration and Harshness (NVH) characteristic. (Available by corner; LH 81391 \u0026amp; RH 81392 and for the axle; 81393).\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSPC Arms Feature:\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan size=\"4\" color=\"#af0000\" style=\"color: #af0000; font-size: large;\" data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e•\u003c\/b\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan size=\"4\" color=\"#af0000\" style=\"color: #af0000; font-size: large;\" data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e•\u003c\/b\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Hooked link to maximize clearances\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan size=\"4\" color=\"#af0000\" style=\"color: #af0000; font-size: large;\" data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e•\u003c\/b\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e OE style, maintenance free, booted ball joints\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan size=\"4\" color=\"#af0000\" style=\"color: #af0000; font-size: large;\" data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e•\u003c\/b\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Large 18mm threaded adjuster links\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan size=\"4\" color=\"#af0000\" style=\"color: #af0000; font-size: large;\" data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e•\u003c\/b\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Replacement pinch bolts included\u003c\/span\u003e","brand":"SPC","offers":[{"title":"Default Title","offer_id":41035285397666,"sku":"81393","price":1369.56,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/dgfhgfdhgh_5178e335-4911-4a3f-af10-faadf03152bb.png?v=1633580329"},{"product_id":"spc-adjustable-racing-control-arm-kit-audi-c8-a6-s6-rs6-b9-q5-sq5-q7-sq7-q8-rsq8","title":"SPC Adjustable Racing Control Arm Kit - Audi \/ C8 A6 \/ S6 \/ RS6 \/ B9 Q5 \/ SQ5 \/ Q7 \/ SQ7 \/ Q8 \/ RSQ8","description":"\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003eGet ready for the track with this four (4) arm set of adjustable upper links for newer Audi models. This kit has four arms so you can change camber and caster ±1.5° on both sides. xAxis™ sealed flex joints replace the overly compliant inner bushings with a free pivoting, minimum compliance, joint. You will feel the difference in handling.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan size=\"4\" color=\"#af0000\" style=\"color: #af0000; font-size: large;\" data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e•\u003c\/b\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Forged 6061-T6 Aluminum construction for maximized strength at a minimum weight\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan size=\"4\" color=\"#af0000\" style=\"color: #af0000; font-size: large;\" data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e•\u003c\/b\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Hooked link to maximize clearances\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan size=\"4\" color=\"#af0000\" style=\"color: #af0000; font-size: large;\" data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e•\u003c\/b\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e OE style, maintenance free, booted ball joints\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan size=\"4\" color=\"#af0000\" style=\"color: #af0000; font-size: large;\" data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e•\u003c\/b\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Large 18mm threaded adjuster links\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan size=\"4\" color=\"#af0000\" style=\"color: #af0000; font-size: large;\" data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e•\u003c\/b\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e Replacement pinch bolts included\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan size=\"4\" color=\"#af0000\" style=\"color: #af0000; font-size: large;\" data-mce-fragment=\"1\"\u003e\u003cb data-mce-fragment=\"1\"\u003e•\u003c\/b\u003e\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e xAxis™ sealed flex joints replacing overly compliant OE inner bushings with a free pivoting, minimum compliance, joint\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"SPC","offers":[{"title":"Default Title","offer_id":41035285528738,"sku":"81398","price":1667.82,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/dgfhgfdhgh_be5c1560-3c2c-4ea0-8f90-ab406d0d9aa0.png?v=1633580331"},{"product_id":"034-motorsport-dynamic-billet-adjustable-front-sway-bar-end-links-audi-many-models-check-fitment","title":"034 Motorsport Dynamic+ Billet Adjustable Front Sway Bar End Links - Audi (many models, check fitment)","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003eReplace your flimsy, imprecise OEM sway bar end links with these performance engineered Dynamic+ Billet Adjustable Front Sway Bar End Links for B8\/B9 Audi A4\/S4\/A5\/S5\/RS5\/Q5\/SQ5\/Allroad, C7\/C8 Audi A6\/A7\/S6\/S7, D4 A8\/S8, and 4L\/4M Q7 from 034Motorsport! These end links allow for uncompromised transfer of suspension movement to the sway bar, and are adjustable in length, allowing you to eliminate preload on the sway bar. 034Motorsport Dynamic+ Billet Adjustable Front Sway Bar End Links use high-misalignment ball joints, ensuring that the end links do not bind as the suspension articulates. The threaded shaft diameter has also been maximized for increased strength.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eIn addition, adjustable sway bar end links allow you to adjust preload on the sway bar, as well as alleviate potential sway bar clearance issues caused by lowering your car.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eWHAT IS SWAY BAR PRELOAD?\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen a sway bar is preloaded, it means that it is already twisted when the car is at rest, and it’s trying to roll the car to one side because of this. This will lead to asymmetric behaviour and the car will favor tuning one way versus the other.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePreload is detectable when the car is at ride-height on a flat surface, and removal of an end link is difficult because the sway bar is already twisted and applying force on the bolt, or installing the endlink is difficult because the bar needs to be twisted to insert the bolt through the hole in the sway bar. With equal-length non-adjustable sway bar end links, removing preload is not possible.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eBy utilizing our 034Motorsport adjustable end links, the lengths of each endlink can be adjusted so that the endlink can be easily installed at ride-height without needing to twist the bar to get it to fit. Zero preload provides symmetrical handling in right and left turns.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFEATURES:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCNC Machined 6061-T6 Aluminum Bodies (Anodized Black for Durability)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eZinc Plated Steel Ball Joints\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRubber is Vulcanized to the Steel for Extra Strength and Durability\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaximized Diameter of Threads into End Link Shaft for Increased Strength\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOEM+ Quality with Adjustability\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eQuieter with Less Maintenance than Spherical Motorsport End Links\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e+\/- 0.75\" of Adjustability (1.5\" Total Adjustment Range)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDirect Drop-In Replacement for Factory End Links\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSold In Pairs\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFUNCTIONS:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAdjust Sway Bar Preload - Essential When Corner Balancing Lowered Vehicles\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncreased Strength for Stiffer Sway Bars, Heavier Loads and Aggressive Use\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved Sway Bar Reaction Time \u0026amp; Accuracy\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eREPLACES:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4M0-411-317\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":41035334025378,"sku":"034-402-4033","price":241.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/dynamic-plus-billet-adjustable-r.jpg?v=1633711495"},{"product_id":"apr-ignition-coil-rs3-style","title":"APR Ignition Coil (RS3 Style)","description":"\u003cdiv class=\"full_description\"\u003eAPR Ignition Coils are designed to be a direct plug-and-play upgrade to factory coils, and provide greater energy output, ensuring a stronger and more consistent spark. The commonplace replacement of factory ignition coils with those taken from higher output Audi RS models, such as the 2.5T, is popularly believed to provide greater energy output. However, testing proves that they are no more powerful than the factory coils that are found on 1.8T and 2.0T engines. APR Ignition Coils increase energy output by 10%. They are a direct upgrade or replacement, and come with the coveted red housing made popular by the Audi R8!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003e10% more energy output than stock\u003c\/li\u003e\n\u003cli\u003eRed housing with APR Logo\u003c\/li\u003e\n\u003cli\u003eTrue upgrade, not just aesthetic\u003c\/li\u003e\n\u003cli\u003eDirect plug-and-play\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APR","offers":[{"title":"Red","offer_id":41035336056994,"sku":"MS100192","price":76.49,"currency_code":"CAD","in_stock":true},{"title":"Blue","offer_id":41035336089762,"sku":"MS100204","price":76.49,"currency_code":"CAD","in_stock":true},{"title":"Grey","offer_id":41035336122530,"sku":"MS100203","price":76.49,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/ms100192_001_19a014e9-103f-4781-962b-ea490da9e34e.jpg?v=1646856137"},{"product_id":"oil-filler-cap-vw-audi-2015-many-models-check-fitment","title":"Oil Filler Cap - VW\/Audi 2015+ (many models check fitment)","description":"\u003cbr\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong\u003eRein Automotive Engine Oil Filler Cap\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis is an OE quality oil filler cap. Rein automotive products provide you with the proper fit, form, and function for European vehicles. With fitments for some of the world's finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top-quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long-lasting durability.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cbr\u003eFeatures and Benefits:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOriginal Equipment fit, form, and function\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eManufactured from high-quality materials\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRight fit the first time\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eO-ring is black in color\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFor European vehicles\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePart #'s\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e06K-103-485-C \/ 06K103485 C \/ 06K 103 485 C \/ 06K103485C\u003cbr\u003e\u003cbr\u003e06K-103-485-A \/ 06K103485 A \/ 06K 103 485 A \/ 06K103485A\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Rein","offers":[{"title":"Default Title","offer_id":41035534205090,"sku":"06K103485C-REI","price":24.71,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/06K103485C-REI.jpg?v=1633583318"},{"product_id":"034motorsport-carbon-fiber-engine-cover-audi-b9-3-0t","title":"034Motorsport Carbon Fiber Engine Cover | Audi B9 3.0T","description":"\u003cp data-mce-fragment=\"1\"\u003e034Motorsport's Carbon Fiber Engine Cover for the B9 S4\/S5 is designed to tastefully complement the factory engine bay with a beautiful carbon fiber weave that is perfectly matched to our X34 Carbon Fiber Audi B9 S4 Air Intake.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis genuine carbon fiber cover is an overlay for the plastic factory engine cover, retaining the factory Audi rings and TFSI logo for a true OEM+ appearance.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFEATURES:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCarbon Fiber Weave Matches Other OEM and 034 Carbon Fiber Weaves\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e034 Logo included uninstalled in the box for customer choice of branded or OEM+ style aesthetics\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy Install with 3M VHB Double-Sided Tape\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":41036058493090,"sku":"034-1ZZ-1004","price":571.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/carbon-fiber-engine-cover-audi-b9-30t-engines-034-1zz-1004-02.jpg?v=1633750968"},{"product_id":"h-r-2019-audi-a6-premium-a6-premium-plus-a6-prestige-awd-f2-sport-spring-w-sport-susp","title":"H\u0026R 2019 Audi A6 Premium\/A6 Premium Plus\/A6 Prestige (AWD) F2 Sport Spring (w\/Sport Susp.)","description":"\u003cp\u003eSport Spring kits are H\u0026amp;Rs number one selling product. Enhance the look of your vehicle with a reduced fender well gap. H\u0026amp;R Sport Springs lower the vehicles center of gravity and reduce body roll for better handling. The progressive spring rate design provides superb ride quality and comfort. A lower wind resistance signature will make the vehicle more streamlined and improve gas mileage. If you are only looking to improve one part of your vehicles suspension, you cannot go wrong with installing Sport Springs. Fun to drive, H\u0026amp;R Sport Springs are the number one upgrade for your vehicle.\u003c\/p\u003e","brand":"H\u0026R","offers":[{"title":"Default Title","offer_id":41036374474914,"sku":"HRS28687-2","price":552.27,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/SportSprings_233c5c8d-0a97-4e49-bc4e-11f8f7470be8.jpg?v=1633590851"},{"product_id":"apr-high-pressure-fuel-pump-2-9t-3-0t-ea839-new-pump-1507155","title":"APR High Pressure Fuel Pump - 2.9T \u0026 3.0T EA839 (New Pump)","description":"\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003eThe APR High Pressure Fuel Pump (HPFP) increases maximum volume of fuel the HPFP can deliver by 37% over stock! In doing so, the direct injection fueling system is capable of satisfying fueling requirements set forth by high horsepower setups. This is accomplished by increasing the displacement of the pump using high quality components to exacting tolerances. On the B9 2.9T we achieved an additional 37 AWHP and 50 AWFTLBS over our Stage 1 (E85) ECU Upgrade by adding the pump and running our Stage 1+ (E85) ECU Upgrade! How the direct injection system works: A low pressure fuel pump (LPFP) in the fuel tank delivers fuel to the high pressure fuel pump (HPFP) at roughly 4 to 6 bar. Fuel pressure is then bumped up to a maximum of 200 bar, depending on factory parts, with the HPFP. Finally, high pressure fuel is delivered to the injectors, which spray directly into the cylinders. The problem: The volume of fuel the HPFP pump can displace is directly tied to the displacement of the pump (Internal bore size, and camshaft dictated stroke), and engine speed. The pump is driven off of a lobe on the camshaft. Larger turbocharger systems, and ethanol usage are capable of taxing this system, especially in the mid to lower RPM range where fuel volume is lower. The APR solution: We dramatically increase the volume of fuel the HPFP can displace at every RPM by increasing the displacement of the HPFP. This is accomplished by increasing the bore diameter of the pump's internal pressurizing cylinder. It's important to understand, despite the name, a HPFP upgrade is not necessary designed to increase the engine's fuel rail pressure. The primary goal is to increase the volume of fuel available, which will keep fuel pressure steady even in the most demanding of situations! High quality components and extreme tolerances: The HPFP internals must be machined to extreme tolerances and installed in a clean environment or the pump can easily fail. Dimensional tolerances on the APR HPFP are as tight as .00004\" and geometric tolerances are as tight as .00005\". The plunger and barrel are created from certified and heat-treated bearing-grade stainless steel and the plunger undergoes a special diamond like coating process for exceptional surfaces hardness and ultra-reliable operation. To prevent float associated with altering the plunger's mass, APR supplies each unit with a properly specified spring. All necessary internal seals are replaced. Internal testing: All APR HPFPs are assembled in house under strict assembly guidelines. Each pump is then tested on our test rig to ensure the pumps operate as designed. This step is important for several reasons. It's critical in determining if a pump has a failure from incorrect install, a leaking seal, or a bad solenoid. Secondly, a seized pump on the vehicle at startup can cause damage to the engine's camshaft. By testing each pump, we all but eliminate these possibility. Proven track record: APR pioneered HPFP upgrades in the early days of VAG direct injection engines. Soon after, APR became an OEM supplier of HPFP and GDI components to VAG for use in various race cars, racing series, project cars, and concept vehicles. The APR HPFP has been at the center of countless motorsport victories across the globe and has operated with a nearly perfect tract record since the program's motorsport backed inception in 2006. With tens of thousands of pumps sold, APR has a wealth of knowledge, and manufacturing expertise necessary to deliver a product that will and has stood the test of time. This kit includes a new rebuilt pump.\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDramatically increases the volume of fuel displaced by the HPFP by 37%\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e+37 AWHP \/ +50 AWFTLS (B9 2.9T E85 Stage 1 vs 1+ with HPFP)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIdeal for high output race cars and track use\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMaintains higher pressures under demanding situations\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFully rebuilt in house\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFully machine tested and broken in before shipping\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncludes a new OEM pump\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUpgraded and weight matched spring\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTitanium retainer\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDLC coated piston\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eHeat-treated bearing-grade stainless steel material\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e.00004\" dimensional tolerances\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e.00005\" geometrical tolerances\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APR","offers":[{"title":"Default Title","offer_id":41551425863842,"sku":"MS100207","price":2154.17,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/ms100207_001.jpg?v=1646856031"},{"product_id":"cts-turbo-high-performance-ignition-coil-for-gen3-tsi-engines-1-8t-2-0t-2-5t-3-0t-4-0t","title":"CTS Turbo High Performance Ignition Coil for Gen3 TSI Engines (1.8T \/ 2.0T \/ 2.5T \/ 3.0T \/ 4.0T)","description":"\u003cbr\u003e\n\u003cp data-mce-fragment=\"1\"\u003eCTS Turbo is proud to announce our high-performance replacement ignition coil packs for the Gen3 TSI engines and MQB\/MQL platform vehicles.\u003cbr\u003e\u003cbr\u003eOur high-power coil packs offer 10% better performance than OEM “upgrades” such as the RS3 coilpack.\u003cbr\u003e\u003cbr\u003eThese are the perfect replacement or upgrade to your Gen3 TSI engine to keep it running at it’s peak performance.\u003cbr\u003e\u003cbr\u003e\u003cstrong data-mce-fragment=\"1\"\u003eSOLD INDIVIDUALLY, add as many as your engine requires.\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003eNOTE: fits many different models, please confirm fitment on your vehicle before you place the order.\u003cbr\u003e\u003cbr\u003e\u003c\/strong\u003eReplaces OE numbers: 06H905110L, 06H905110H, 06H905110G, 06J905110G, 06J905110F, 06J905110K, 06J905110N\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"CTS Turbo","offers":[{"title":"Default Title","offer_id":42262592422050,"sku":"CTS-IGN-007","price":46.91,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/CTS-IGN-007-2_195b43b3-3456-44c2-9e30-0f0481ae8eee.jpg?v=1654982635"},{"product_id":"wagner-tuning-competition-intercooler-kit-audi-a6-c8-55tfsi","title":"Wagner Tuning Competition Intercooler Kit - Audi \/ A6 C8 \/ 55TFSI","description":"\u003cfont color=\"#FF0000\"\u003eNew release 3. quarter 2019\u003c\/font\u003e\u003cbr\u003e\u003cbr\u003eCompetition Intercooler Kit for Audi A6 C8 fits to the following cars:\u003cbr\u003e\u003cbr\u003eAudi A6 C8 55TFSI 250KW\/340PS (2019+)\u003cbr\u003eAudi A7 C8 55TFSI 250KW\/340PS (2019+)\u003cbr\u003e\u003cbr\u003eThe Competition Intercooler has the following core dimensions (550mm x 445mm x 70mm = 17.130cm³). The high performance intercooler core provides a 134% larger frontal area and 105% more volume compared to the stock mounted intercooler. Our engineers have increased the intercooler core size and efficiency, as well as improved the endtank design to remove any OEM bottlenecks, resulting in increased flow rating and charge cooling properties. We use our award winning WAGNERTUNING Competition Intercooler Core which is made specifically for this application. Constructed of the highest quality Tube Fin intercooler cores with inside turbulators combined with cast aluminum endtanks optimized by CFD for best possible internal airflow. \u003cbr\u003eThe connection diameters are Ø62mm at the intercooler inlet and Ø67mm at the intercooler outlet. \u003cbr\u003eThe result is excellent cooling properties and a lot less pressure drop then the stock intercooler. Despite of it´s size the weight of the complete intercooler is only 9,5kg. This Intercooler Kit is the best choice when it comes to performance gains and low intake temperatures and also the right thing for racing. All of our intercooler use an anti corrosion protective coating with perfect thermal heat dissapating character. Optimal cooling with clearly more power. Kit is ready for installation, 100% plug and play. All of our products undergo rigorous quality control.\u003cbr\u003e\u003cbr\u003eDimensions stock Intercooler:\u003cbr\u003e720mm x 145mm x 80mm\u003cbr\u003eV=8,35 Liter\u003cbr\u003eA=1044 cm²\u003cbr\u003e\u003cbr\u003eDimensions WAGNERTUNING intercooler:\u003cbr\u003e550mm x 445mm x 70mm\u003cbr\u003eV=17,13 Liter\u003cbr\u003eA=2447 cm²\u003cbr\u003e\u003cbr\u003epacking list:\u003cbr\u003e1 intercooler (coated black)\u003cbr\u003e1 mounting material\u003cbr\u003e1 installation instruction\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"http:\/\/www.wagner-tuningshop.de\/_pictures\/flow\/200001120-Temp.jpg\" alt=\"Bild\" height=\"auto\" width=\"100%\"\u003e\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"http:\/\/www.wagner-tuningshop.de\/_pictures\/flow\/200001120-Flow.jpg\" alt=\"Bild\" height=\"auto\" width=\"100%\"\u003e","brand":"Wagner","offers":[{"title":"Default Title","offer_id":42265260163234,"sku":"200001159","price":1453.4,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/200001159.jpg?v=1655017894"},{"product_id":"dynamic-floating-center-caps-audi-rings-audi-fitment-many-models","title":"Dynamic Floating Center Caps \"Audi Rings\" (66mm) - Audi \/ Fitment Many Models","description":"\u003cbr\u003eThe GENUINE part, in the car manufacturer's box, as sold by the new car dealer.\u003cbr\u003e\u003cbr\u003e\n\u003cp data-mce-fragment=\"1\"\u003eDistinctive look with a fascinating presentation. A characteristic of the dynamic hub cap is that the Audi rings are always horizontally balanced when the vehicle is stationary and when it is moving. A distinctive and striking effect for your vehicle on the road and also at car shows and events. \u003cspan data-mce-fragment=\"1\"\u003eThis is a set of 4 Dynamic Center Caps\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePart #'s\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e4M8-071-006-A  \/ 4M8071006 A  \/ 4M8 071 006 A  \/ 4M8071006A \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"VW\/Audi","offers":[{"title":"Default Title","offer_id":42265469649058,"sku":"4M8071006A","price":275.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/4M8071006A_Audi_Rings.jpg?v=1655022819"},{"product_id":"rs3-ignition-coilpack-gen3-1-8t-2-0t-2-5t-evo-3-0t-v6","title":"RS3 Ignition Coil Pack | Gen3 1.8T\/2.0T | 2.5T Evo | 3.0T V6","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003eBosch Ignition Coil -On- Plug\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBenefits of Bosch original equipment quality ignitions coils include the right ignition voltage, long lasting spark, better engine running conditions, lower fuel consumption, and reduced exhaust emissions.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit application\u003c\/li\u003e\n\u003cli\u003eEnsure reliable voltage for smooth engine performance\u003c\/li\u003e\n\u003cli\u003eExcellent mechanical stability and corrosion protection\u003c\/li\u003e\n\u003cli\u003eLower fuel consumption and reduced exhaust emissions for your vehicle\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds OEM specification\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003ePart #'s\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e06H-905-110-L \/ 06H905110 L \/ 06H 905 110 L \/ 06H905110L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e06H-905-110-P \/ 06H905110 P \/ 06H 905 110 P \/ 06H905110P\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e06H-905-110-G \/ 06H905110 G \/ 06H 905 110 G \/ 06H905110G\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e06H-905-110-G \/ 06H905110 G \/ 06H 905 110 G \/ 06H905110G\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e06K-905-110-K \/ 06K905110 K \/ 06K 905 110 K \/ 06K905110K\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e06L-905-110-H \/ 06L905110 H \/ 06L 905 110 H \/ 06L905110H\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":42843142226082,"sku":"06H905110P-BOS","price":55.3,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/06H905110P-BOS_e29a56c1-35b4-400d-b21c-5227ea450b6e.jpg?v=1669137535"},{"product_id":"rs3-ignition-coil-pack-set-audi-2017-3-0t-2","title":"RS3 Ignition Coil Pack Set - Audi 2017+ 2.9T \u0026 3.0T","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSet of 6 Coil Packs\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eGenerally when one coil pack fails that means the rest will also fail soon. We recommend you change all coil packs at once. That way a month later you won't be running a cylinder short because one of your other coil packs failed. \u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eKeep your engine running smooth and at 100%. Recommended to change every 40k miles when doing spark plugs to maintain maximum power and efficiency for your engine.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTaken straight out of the Audi parts catalog for the B9 S4 3.0T (rated at 354BHP) and 8v RS3 2.5T (rated at 400BHP), these engines produce massive power that require high spark energy to light the spark plug under extreme boost pressures! Look no further for reliable, OEM operation for your 1.8T or 2.0T Gen3 engine than this RS3 Ignition Coil Set from high performance Audi S\/RS models.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003ePart #'s\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e06H-905-110-L \/ 06H905110 L \/ 06H 905 110 L \/ 06H905110L\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e06H-905-110-P \/ 06H905110 P \/ 06H 905 110 P \/ 06H905110P\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e06H-905-110-G \/ 06H905110 G \/ 06H 905 110 G \/ 06H905110G\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e06H-905-110-G \/ 06H905110 G \/ 06H 905 110 G \/ 06H905110G\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e06K-905-110-K \/ 06K905110 K \/ 06K 905 110 K \/ 06K905110K\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e06L-905-110-H \/ 06L905110 H \/ 06L 905 110 H \/ 06L905110H\u003c\/span\u003e\u003c\/p\u003e","brand":"VW\/Audi","offers":[{"title":"Default Title","offer_id":42901350875298,"sku":"06H905110L-KT6","price":499.7,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/06H905110L-KT6_ac2093e2-13ec-4782-9450-1a40e4ff19a9.jpg?v=1680156426"},{"product_id":"rs3-ignition-coil-pack-set-audi-2017-3-0t-1","title":"RS3 Ignition Coil Pack Set - Audi 2017+ 2.9T \u0026 3.0T","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSet of 6 Coil Packs\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eGenerally when one coil pack fails that means the rest will also fail soon. We recommend you change all coil packs at once. That way a month later you won't be running a cylinder short because one of your other coil packs failed. \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTaken straight out of the Audi parts catalog for the B9 S4 3.0T (rated at 354BHP) and 8v RS3 2.5T (rated at 400BHP), these engines produce massive power that require high spark energy to light the spark plug under extreme boost pressures! Look no further for reliable, OEM operation for your 1.8T or 2.0T Gen3 engine than this RS3 Ignition Coil Set from high performance Audi S\/RS models.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSince 1972, Eldor has been a story of passion. We’ve dedicated ourselves to becoming a leader in the automotive industry and have a growing global presence.\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eEldor creates some of the highest quality coil packs in the industry and is an OEM supplier for many European car makers.\u003cb data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/b\u003ePart #'s\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e06H-905-110-L \/ 06H905110 L \/ 06H 905 110 L \/ 06H905110L\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e06H-905-110-P \/ 06H905110 P \/ 06H 905 110 P \/ 06H905110P\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e06H-905-110-G \/ 06H905110 G \/ 06H 905 110 G \/ 06H905110G\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e06H-905-110-G \/ 06H905110 G \/ 06H 905 110 G \/ 06H905110G\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e06K-905-110-K \/ 06K905110 K \/ 06K 905 110 K \/ 06K905110K\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e06L-905-110-H \/ 06L905110 H \/ 06L 905 110 H \/ 06L905110H\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e","brand":"Eldor","offers":[{"title":"Default Title","offer_id":42901351006370,"sku":"06H905110L-ELD-KT6","price":420.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/06H905110L-KT6.jpg?v=1680156431"},{"product_id":"rs3-ignition-coil-pack-set-audi-2017-3-0t","title":"RS3 Ignition Coil Pack Set - Audi 2017+ 2.9T \u0026 3.0T","description":"\u003cp\u003eSet of 6 Coil Packs\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eGenerally when one coil pack fails that means the rest will also fail soon. We recommend you change all coil packs at once. That way a month later you won't be running a cylinder short because one of your other coil packs failed. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eBenefits of Bosch original equipment quality ignitions coils include the right ignition voltage, long lasting spark, better engine running conditions, lower fuel consumption, and reduced exhaust emissions.  \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDirect fit application\u003c\/li\u003e\n\u003cli\u003eEnsure reliable voltage for smooth engine performance\u003c\/li\u003e\n\u003cli\u003eExcellent mechanical stability and corrosion protection\u003c\/li\u003e\n\u003cli\u003eLower fuel consumption and reduced exhaust emissions for your vehicle\u003c\/li\u003e\n\u003cli\u003eMeets or exceeds OEM specification\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003ePart #'s\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e06H-905-110-L \/ 06H905110 L \/ 06H 905 110 L \/ 06H905110L\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e06H-905-110-P \/ 06H905110 P \/ 06H 905 110 P \/ 06H905110P\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e06H-905-110-G \/ 06H905110 G \/ 06H 905 110 G \/ 06H905110G\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e06H-905-110-G \/ 06H905110 G \/ 06H 905 110 G \/ 06H905110G\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e06K-905-110-K \/ 06K905110 K \/ 06K 905 110 K \/ 06K905110K\u003c\/span\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e06L-905-110-H \/ 06L905110 H \/ 06L 905 110 H \/ 06L905110H\u003cbr\u003e\u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Bosch","offers":[{"title":"Default Title","offer_id":42901351334050,"sku":"06H905110L-BOS-KT6","price":363.1,"currency_code":"CAD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/06H905110L-BOS-KT6.jpg?v=1680156438"},{"product_id":"brake-anti-rattle-clip-set-vw-audi-c8-a6-s6-s7-d5-a8-q7-q8-sq8-4n0698231","title":"Brake Anti-Rattle Clip Set - VW\/Audi \/ C8 \/ A6 \/ S6 \/ S7 \/ D5 \/ A8 \/ Q7 \/ Q8 \/ SQ8","description":"\u003cbr\u003eThe GENUINE part, as sold new by the dealer.\u003cbr\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003e400X38MM\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePart #'s\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e4N0-698-231 \/ 4N0 698 231 \/ 4N0698231","brand":"VW\/Audi","offers":[{"title":"Default Title","offer_id":43191495590050,"sku":"4N0698231","price":31.36,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/4N0698231.jpg?v=1680127281"},{"product_id":"brake-anti-rattle-clip-set-vw-audi-c8-a6-s6-s7-d5-a8-e-tron-q7-q8-sq8-4k0698231b","title":"Brake Anti-Rattle Clip Set - VW\/Audi \/ C8 \/ A6 \/ S6 \/ S7 \/ D5 \/ A8 \/ E-Tron \/ Q7 \/ Q8 \/ SQ8","description":"\u003cbr\u003eThe GENUINE part, as sold new by the dealer.\u003cbr\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003e350X28 MM\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePart #'s\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e4K0-698-231-B \/ 4K0698231 B \/ 4K0 698 231 B \/ 4K0698231B","brand":"VW\/Audi","offers":[{"title":"Default Title","offer_id":43191495688354,"sku":"4K0698231B","price":94.83,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/4K0698231B.jpg?v=1680127287"},{"product_id":"rear-brake-pad-set-350x28-vw-audi-c8-a6-s6-a8-d5-s8-q7-4m0698451bg","title":"Rear Brake Pad Set (350x28) - VW\/Audi \/ C8 \/ A6 \/ S6 \/ A8 \/ D5 S8 \/ SQ7 \/ SQ8","description":"\u003cp\u003e\u003cbr\u003eThe GENUINE part, as sold new by the dealer.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePart #'s\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e4M0-698-451-BG \/ 4M0698451 BG \/ 4M0 698 451 BG \/ 4M0698451BG\u003cbr\u003e\u003c\/p\u003e","brand":"VW\/Audi","offers":[{"title":"Default Title","offer_id":43191495753890,"sku":"4M0698451BG","price":194.79,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/1802770_x800_d3b06ee0-e821-4550-ac66-b72159fa95b8.jpg?v=1680127290"},{"product_id":"oil-filter-porsche","title":"Purflux Oil Filter - B9 S4\/S5\/RS5\/SQ5","description":"\u003cp\u003e\u003cbr\u003eOEM Oil Filter for your B9 S4\/S5\/RS5\/SQ5. Made by PurFlux.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe oil filter keeps contaminants from making their way through your engine and causing premature wear and possible failure. Those small metal particles, if not trapped by the filter, would abrade all moving metal to metal connections within the engine and wear out components quickly. Filter out all of those terrible contaminants and make sure they do not get back in. This filter also includes the sealing o-ring for the oil filter housing.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOE Part # 06M198405F\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e Vaico Part # V45-0179\u003c\/p\u003e","brand":"Purflux","offers":[{"title":"Default Title","offer_id":43323643101346,"sku":"06M198405F","price":27.54,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/V45-0179_02.jpg?v=1685726646"},{"product_id":"034motorsport-billet-aluminum-adjustable-lowering-link-kit-audi-b9-sq5-c8-a6-a7-s6-s7-rs6-models-w-air-suspension","title":"034Motorsport Billet Aluminum Adjustable Lowering Link Kit - Audi \/ B9 \/ SQ5 \/ C8 \/ A6 \/ A7 \/ S6 \/ S7 \/ RS6 \u0026 Models w\/ Air Suspension","description":"\u003cbr\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLowering your Audi B9\/B9.5 SQ5, C8 A6\/S6\/RS6, C8 A7\/S7\/RS7, 4M\/4M.5 Q7\/SQ7, 4M8 Q8\/SQ8\/RSQ8, or E-Tron SUV with factory air suspension has never been easier with the use of the 034Motorsport Billet Aluminum Adjustable Lowering Link Kit. These Lowering Links are a direct OE replacement of the factory height sensor links and provide adjustability, allowing users to lower their car up to 50mm front and rear! Due to their billet aluminum construction, these links are made to withstand the elements for both daily and spirited driving.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFrom the factory, Audi vehicles with Adaptive Air Suspension utilize a fixed, plastic arm connected to the frame to control the vehicle's ride height. By replacing this OE link with our adjustable lowering links, it allows for precise adjustment of the ride height of the vehicle.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFEATURES:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo Wiring or Modifications\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eOE Style Connecting Ends\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFully Adjustable on the Vehicle\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBillet Aluminum Adjuster for Extra Strength\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLowers up to 50MM Front and Rear\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eKit Includes Four Links with Seals\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo Other Products Needed to Lower your Vehicle\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eADJUSTMENT RANGE:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFront Height Range: +10mm to -10mm (May Vary Depending on Chassis)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRear Height Range: +20mm to -42mm (May Vary Depending on Chassis)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFRONT LINK RANGE: 90-110MM (MEASURED END TO END)\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStock Height: 103mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eShorten Link to Lower Car\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eREAR LINK RANGE: 140MM-160MM (MEASURED END TO END)\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStock Height: 145mm\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLengthen Link to Lower Car\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eWHAT’S INCLUDED:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4x Billet Aluminum Adjuster Rods\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4x Ball Joint - RH Threads\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4x Ball Joint - LH Threads\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e4x Dust Seals\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFitment Guide:\u003c\/h2\u003e\n\u003ctable width=\"320\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd width=\"64\"\u003e\u003cstrong\u003eMake \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"64\"\u003e\u003cstrong\u003eModel\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"64\"\u003e\u003cstrong\u003eYears\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"64\"\u003e\u003cstrong\u003eChassis \u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd width=\"64\"\u003e\u003cstrong\u003eEngine\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA6\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003ctd\u003eC8\u003c\/td\u003e\n\u003ctd\u003e3.0 TFSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eA7\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003ctd\u003eC8\u003c\/td\u003e\n\u003ctd\u003e3.0 TFSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eE-Tron\u003c\/td\u003e\n\u003ctd\u003e2018+\u003c\/td\u003e\n\u003ctd\u003eMLB\u003c\/td\u003e\n\u003ctd\u003eASM\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eQ7\u003c\/td\u003e\n\u003ctd\u003e2017-2019\u003c\/td\u003e\n\u003ctd\u003e4M\u003c\/td\u003e\n\u003ctd\u003e2.0 TFSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eQ7\u003c\/td\u003e\n\u003ctd\u003e2020+\u003c\/td\u003e\n\u003ctd\u003e4M.5\u003c\/td\u003e\n\u003ctd\u003e2.0 TFSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eRS6\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003ctd\u003eC8\u003c\/td\u003e\n\u003ctd\u003e4.0 TFSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eRS7\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003ctd\u003eC8\u003c\/td\u003e\n\u003ctd\u003e4.0 TFSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eRS7\u003c\/td\u003e\n\u003ctd\u003e2020+\u003c\/td\u003e\n\u003ctd\u003e4M8\u003c\/td\u003e\n\u003ctd\u003e4.0 TFSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eRSQ8\u003c\/td\u003e\n\u003ctd\u003e2020+\u003c\/td\u003e\n\u003ctd\u003e4M8\u003c\/td\u003e\n\u003ctd\u003e4.0 TFSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS6\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003ctd\u003eC8\u003c\/td\u003e\n\u003ctd\u003e2.9 TFSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eS7\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003ctd\u003eC8\u003c\/td\u003e\n\u003ctd\u003e2.9 TFSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eSQ5\u003c\/td\u003e\n\u003ctd\u003e2018+\u003c\/td\u003e\n\u003ctd\u003eB9\/B9.5\u003c\/td\u003e\n\u003ctd\u003e3.0 TFSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eSQ7\u003c\/td\u003e\n\u003ctd\u003e2020+\u003c\/td\u003e\n\u003ctd\u003e4M.5\u003c\/td\u003e\n\u003ctd\u003e4.0 TFSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAudi\u003c\/td\u003e\n\u003ctd\u003eSQ8\u003c\/td\u003e\n\u003ctd\u003e2019+\u003c\/td\u003e\n\u003ctd\u003e4M8\u003c\/td\u003e\n\u003ctd\u003e4.0 TFSI\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":43348014301346,"sku":"034-401-Z072","price":208.8,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/034-401-Z072.jpg?v=1686839934"},{"product_id":"034motorsport-4-bar-map-sensors-audi-ea839-2-9t-3-0t","title":"034Motorsport 4 Bar MAP Sensors - Audi \/ EA839 \/ 2.9T \/ 3.0T","description":"\u003ch3\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cp\u003eThe 034Motorsport 4 Bar MAP Sensors are designed to replace the factory 3 Bar MAP sensors on the EA839 2.9T\/3.0T engine. These sensors are a required upgrade for 034Motorsport Dynamic+ Stage 3 Software. Included are two 034Motorsport 4 Bar MAP Sensors which plug directly into the OEM harness and are a direct drop-in replacement.\u003c\/p\u003e\n\u003ch3\u003eFEATURES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e4-Bar MAP Sensors Designed to Replace the Factory 3-Bar MAP Sensors on the EA839 2.9T\/3.0T Engines\u003c\/li\u003e\n\u003cli\u003eEnables Calibrations Above the Factory MAP Sensor 3-Bar Limit\u003c\/li\u003e\n\u003cli\u003eSpecific Software Calibration is Required to Utilize These Sensors\u003c\/li\u003e\n\u003cli\u003eManufactured by an OE Supplier to 034Motorsport Specifications\u003c\/li\u003e\n\u003cli\u003eSensors Plug Directly into the OE Harness\u003c\/li\u003e\n\u003cli\u003eDirect Drop-In Replacement of the Stock 3-Bar Sensors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOE PART INTERCHANGE:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e06E 906 051 AB\u003c\/li\u003e\n\u003cli\u003e06E 906 051 AG\u003c\/li\u003e\n\u003cli\u003e06E 906 051 AC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWHAT’S INCLUDED:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2x 4-Bar MAP Sensors\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":43616730349730,"sku":"034-111-5003","price":335.52,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/034motorsport-4-bar-map-sensors_1.jpg?v=1691772695"},{"product_id":"ie-lowering-link-kit-audi-c8-a6-a7-s6-s7-rs6-rs7-e-tron","title":"IE Lowering Link Kit - Audi \/ C8 \/ A6 \/ A7 \/ S6 \/ S7 \/ RS6 \/ RS7 \/ E-Tron","description":"\u003cbr\u003e\n\u003cdiv class=\"shg-c\" id=\"s-034df19d-5da1-41be-bd16-32ef5df65b94\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-row\" data-col-grid-mode-on=\"\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-c-lg-6 shg-c-md-6 shg-c-sm-6 shg-c-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-c shogun-image-container    shg-align-center\" id=\"s-dc84e648-cfbf-4b91-8d5c-340128d40586\" data-mce-fragment=\"1\"\u003e\u003cimg data-src=\"https:\/\/i.shgcdn.com\/6317b74a-1ca5-4ebe-8d94-144baa672ccc\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\" width=\"\" height=\"\" alt=\"\" class=\"shogun-image  shogun-lazyloaded\" src=\"https:\/\/i.shgcdn.com\/6317b74a-1ca5-4ebe-8d94-144baa672ccc\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/i.shgcdn.com\/6317b74a-1ca5-4ebe-8d94-144baa672ccc\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shg-c-lg-6 shg-c-md-6 shg-c-sm-6 shg-c-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv id=\"s-108b8e12-eec0-41fa-8e5e-588cfdcf6b11\" class=\"shg-c\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-rich-text shg-theme-text-content\" data-mce-fragment=\"1\"\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eDial in ride height from stock to your perfect stance\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e100% compatible with factory air ride system\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eNo computer issues, bypassing, or reprogramming required\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRetains factory drive quality and comfort\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLeft\/right-hand threads allow adjustment without removal\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eLaser-etched adjustment marks for fast and easy height adjustment\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eRust-free anodized aluminum body and stainless hardware\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eSilent operation with no seizing, rattles, or noises\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eInjection molded and maintenance free ball ends\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eStrong and reliable even under demanding motorsport use\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shg-fw\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-box-vertical-align-wrapper\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-box shg-c\" id=\"s-b0c52bac-979e-4940-9599-41e9c9ee11b6\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-box-overlay\" data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"shg-box-content\" data-mce-fragment=\"1\"\u003e\n\u003cdiv id=\"s-39dd6f20-bc63-4555-b8a9-a5394a54b210\" class=\"shg-c\" data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"shg-c\" id=\"s-a2649047-618d-41c3-85a2-673ebcdf37ed\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-row\" data-col-grid-mode-on=\"\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-c-lg-6 shg-c-md-6 shg-c-sm-6 shg-c-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv id=\"s-576f83e5-50fc-4eef-b35f-1467ea597494\" class=\"shg-c  shg-align-center\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shogun-heading-component\" data-mce-fragment=\"1\"\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eFAST ADJUSTMENT\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"s-dec55500-496d-4712-86c3-3af2fe5311df\" class=\"shg-c  shg-align-center\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shogun-heading-component\" data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eENGINEERED TO MAKE LIFE EASY\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"s-54d2ed53-15c9-44a7-8aad-d3a30f75680e\" class=\"shg-c\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-rich-text shg-theme-text-content\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur end links have been engineered to fine-tune your ride height without needing to remove them between adjustments. The stainless threads are right, and left-hand threaded to adjust vehicle height with a quick spin of the link body. We took it a step further with viewing windows and laser-etched reference marks to quickly and easily level every corner in no time.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eWith no hassles from typical lowering link designs, skip straight to that perfect stance you have been dreaming of.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shg-c-lg-6 shg-c-md-6 shg-c-sm-6 shg-c-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-c shogun-image-container    shg-align-center\" id=\"s-876def12-1abd-4266-ad11-d882a00a74c9\" data-mce-fragment=\"1\"\u003e\u003cimg data-src=\"https:\/\/i.shgcdn.com\/5ec9cff1-1d53-4ad4-9aed-e0afa75115aa\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\" width=\"\" height=\"\" alt=\"\" class=\"shogun-image  shogun-lazyloaded\" src=\"https:\/\/i.shgcdn.com\/5ec9cff1-1d53-4ad4-9aed-e0afa75115aa\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/i.shgcdn.com\/5ec9cff1-1d53-4ad4-9aed-e0afa75115aa\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shg-c\" id=\"s-9ff9251f-aae9-4392-a961-9ce4cfe836b2\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-row\" data-col-grid-mode-on=\"\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-c-lg-6 shg-c-md-6 shg-c-sm-6 shg-c-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv id=\"s-8bf9c9e9-d121-4128-971d-24fa54bd3727\" class=\"shg-c  shg-align-center\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shogun-heading-component\" data-mce-fragment=\"1\"\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eBEFORE\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"s-84d87be5-8d07-457f-83ed-4eba4656b9a0\" class=\"shg-c  shg-align-center\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shogun-heading-component\" data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSTOCK LINKS\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shg-c shogun-image-container    shg-align-center\" id=\"s-6992e2b6-8664-43ad-876b-f92577ed5185\" data-mce-fragment=\"1\"\u003e\u003cimg data-src=\"https:\/\/i.shgcdn.com\/76b1bd36-3324-4adc-affe-b2ed561df6df\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\" width=\"\" height=\"\" alt=\"\" class=\"shogun-image  shogun-lazyloaded\" src=\"https:\/\/i.shgcdn.com\/76b1bd36-3324-4adc-affe-b2ed561df6df\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/i.shgcdn.com\/76b1bd36-3324-4adc-affe-b2ed561df6df\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shg-c-lg-6 shg-c-md-6 shg-c-sm-6 shg-c-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv id=\"s-fa774e5c-74fa-4403-9ec5-2c1b4751f47a\" class=\"shg-c  shg-align-center\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shogun-heading-component\" data-mce-fragment=\"1\"\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eAFTER\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"s-f5ced040-f602-40f4-9e5f-b62ed328a67b\" class=\"shg-c  shg-align-center\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shogun-heading-component\" data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eIE LOWERING LINKS\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shg-c shogun-image-container    shg-align-center\" id=\"s-838e360f-efea-4824-aaee-c21818e1b1d6\" data-mce-fragment=\"1\"\u003e\u003cimg data-src=\"https:\/\/i.shgcdn.com\/1a6e501f-c72d-4f3d-bbc9-f95fa3abd10c\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\" width=\"\" height=\"\" alt=\"\" class=\"shogun-image  shogun-lazyloaded\" src=\"https:\/\/i.shgcdn.com\/1a6e501f-c72d-4f3d-bbc9-f95fa3abd10c\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/i.shgcdn.com\/1a6e501f-c72d-4f3d-bbc9-f95fa3abd10c\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\"\u003e\u003c\/div\u003e\n\u003cdiv id=\"s-4e9f6eca-c614-4d9b-8cca-6c040a34f10f\" class=\"shg-c\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-rich-text shg-theme-text-content\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"s-6502a8a4-0a62-4072-b09c-8958b6559ab6\" class=\"shg-c\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-rich-text shg-theme-text-content\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eExample measured at approximately 1.25\" of drop on a 2021 RS7 in comfort mode. Exact drop may vary depending on the link set height, model, and MMI ride height selection.\u003c\/em\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shg-c\" id=\"s-ba72bbe7-a65c-48d3-9ece-b4164aa14a3f\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-row\" data-col-grid-mode-on=\"\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-c-lg-6 shg-c-md-6 shg-c-sm-6 shg-c-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-c shogun-image-container    shg-align-center\" id=\"s-4785eef0-d9a8-4c51-ae1a-5158d1f74b18\" data-mce-fragment=\"1\"\u003e\u003cimg data-src=\"https:\/\/i.shgcdn.com\/5df86232-398e-4348-81ae-c8ed9d57cad8\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\" width=\"\" height=\"\" alt=\"\" class=\"shogun-image  shogun-lazyloaded\" src=\"https:\/\/i.shgcdn.com\/5df86232-398e-4348-81ae-c8ed9d57cad8\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/i.shgcdn.com\/5df86232-398e-4348-81ae-c8ed9d57cad8\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shg-c-lg-6 shg-c-md-6 shg-c-sm-6 shg-c-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv id=\"s-823397ff-f101-4012-abee-bcdb87b971ca\" class=\"shg-c  shg-align-center\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shogun-heading-component\" data-mce-fragment=\"1\"\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eHOW IT WORKS\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"s-adda597b-e2fc-4deb-96b7-139bf33fbf01\" class=\"shg-c  shg-align-center\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shogun-heading-component\" data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eEASY WOW-FACTOR\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"s-bb6f00ba-1cf0-43aa-85c4-aff3103516f4\" class=\"shg-c\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-rich-text shg-theme-text-content\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur lowering links are engineered to work hand in hand with your suspension potentiometer to lower the ride height by changing the angle of the sensor reading. This approach retains factory suspension quality without reprogramming the computer or changing expensive suspension components.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cem data-mce-fragment=\"1\"\u003eSnap the lowering links into place and adjust them to your desired setting for an instant sporty and enthusiast look.\u003c\/em\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"s-52a0b45f-a8cb-496d-b464-7cc4a781a07a\" class=\"shg-c\" data-mce-fragment=\"1\"\u003e\u003chr data-mce-fragment=\"1\"\u003e\u003c\/div\u003e\n\u003cdiv id=\"s-7f3c07b2-8b84-430f-bbad-b2c779633c54\" class=\"shg-c  shg-align-center\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shogun-heading-component\" data-mce-fragment=\"1\"\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eWHAT MAKES IE LINKS DIFFERENT?\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"s-c90d5db5-c5de-4b3a-a49d-541ef8e9a261\" class=\"shg-c  shg-align-center\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shogun-heading-component\" data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSIMPLE, ADJUSTABLE, RELIABLE\u003c\/h3\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shg-c\" id=\"s-6cc06171-012e-4eea-b2c7-98f0dcdea07f\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-row\" data-col-grid-mode-on=\"\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-c-lg-6 shg-c-md-6 shg-c-sm-6 shg-c-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv id=\"s-aee09ecb-4462-4bbf-b8d2-85b2d5366028\" class=\"shg-c  shg-align-center\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shogun-heading-component\" data-mce-fragment=\"1\"\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eINJECTION MOLDED BALL ENDS\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"s-e2657215-2020-4b91-bdec-bd10077a84e8\" class=\"shg-c\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-rich-text shg-theme-text-content\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eOther lowering link designs use non-sealed metal ball ends that lead to a noisy and creaky operation that can even seize and break. \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eIE lowering links\u003c\/strong\u003e feature an injection molded and greased ball end that functions silently just like stock. This design keeps road grime, sand, salt, and dirt out to ensure a long and maintenance-free life.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shg-c-lg-6 shg-c-md-6 shg-c-sm-6 shg-c-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-c shogun-image-container    shg-align-center\" id=\"s-71cf8cdb-fa1a-4d83-98da-202330019748\" data-mce-fragment=\"1\"\u003e\u003cimg data-src=\"https:\/\/i.shgcdn.com\/51295f42-5837-4221-b941-eac85b665b18\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\" width=\"\" height=\"\" alt=\"\" class=\"shogun-image  shogun-lazyloaded\" src=\"https:\/\/i.shgcdn.com\/51295f42-5837-4221-b941-eac85b665b18\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/i.shgcdn.com\/51295f42-5837-4221-b941-eac85b665b18\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shg-c\" id=\"s-54d5fcec-bc5d-4572-bfe4-7dd32e69d64e\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-row\" data-col-grid-mode-on=\"\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-c-lg-6 shg-c-md-6 shg-c-sm-6 shg-c-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-c shogun-image-container    shg-align-center\" id=\"s-446042cb-a169-4988-aaf1-e78055e97757\" data-mce-fragment=\"1\"\u003e\u003cimg data-src=\"https:\/\/i.shgcdn.com\/24dba0d6-6e11-45aa-95a6-0c2abab31916\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\" width=\"\" height=\"\" alt=\"\" class=\"shogun-image  shogun-lazyloaded\" src=\"https:\/\/i.shgcdn.com\/24dba0d6-6e11-45aa-95a6-0c2abab31916\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/i.shgcdn.com\/24dba0d6-6e11-45aa-95a6-0c2abab31916\/-\/format\/auto\/-\/preview\/3000x3000\/-\/quality\/lighter\/\"\u003e\u003c\/div\u003e\n\u003cdiv id=\"s-9a069239-3620-4d55-a109-df76eb34b8db\" class=\"shg-c\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-rich-text shg-theme-text-content\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"shg-c-lg-6 shg-c-md-6 shg-c-sm-6 shg-c-xs-12\" data-mce-fragment=\"1\"\u003e\n\u003cdiv id=\"s-2a7a86f9-6211-4cfa-a8e2-1cde7ad8c11f\" class=\"shg-c  shg-align-center\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shogun-heading-component\" data-mce-fragment=\"1\"\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eQUALITY COMPONENTS\u003c\/h1\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv id=\"s-1a60da9d-7279-4846-934c-0b4e29ebacf0\" class=\"shg-c\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"shg-rich-text shg-theme-text-content\" data-mce-fragment=\"1\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eMost competitor lowering links are manufactured from a single piece of all-thread, light-duty zinc-coated hardware and unsealed ball ends.\u003cstrong data-mce-fragment=\"1\"\u003e IE lowering links\u003c\/strong\u003e are manufactured with stainless hardware, anodized black aluminum bodies, and sealed\/greased ball ends to prevent seizing, breaking, rusting, clunking, or annoying noises.\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"Integrated Engineering","offers":[{"title":"Default Title","offer_id":43628650135714,"sku":"IESUCY1","price":328.89,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/IELoweringLinksforAudiC8RS6RS7S6.jpg?v=1692372833"},{"product_id":"gfb-diverter-valve-dv-vw-audi-2-0t-2-9t-3-0t-b9-c8-mk8-s4-s5-s6-s7-gti-r-more","title":"GFB Diverter Valve DV+ VW\/Audi \/ 2.0T \/ 2.9T \/ 3.0T \/ B9 \/ C8 \/ MK8 \/ S4 \/ S5 \/ S6 \/ S7 \/ GTI \/ R \u0026 More","description":"\u003cbr\u003e\n\u003ch1 data-mce-fragment=\"1\"\u003eThe DV+ options for VW and Audi models!\u003c\/h1\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe T9380 is the latest addition to the DV+ range of diverter valves from GFB (Go Fast Bits). It is specifically designed as a complete replacement for the newer generation of Continental brand OEM diverter valves found in late-model VW and Audi vehicles. \u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eUnlike the earlier generation diverter valves manufactured by Pierburg, the newer Continental valves cannot be disassembled and integrated into a DV+. Therefore, GFB developed the T9380 with a low-profile integrated solenoid as a complete replacement for the Continental diverter valve, enabling a hassle-free installation with no clearance issues.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLike all valves in the DV+ range, the new T9380 delivers the following benefits over the OEM diverter valve:\u003c\/p\u003e\n\u003ch2 data-mce-fragment=\"1\"\u003eT9380 DV+\u003c\/h2\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eImproved boost holding (see next page for more details)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSharper throttle response\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFaster boost recovery after a gearshift or brief throttle lift\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUnrivalled longevity, backed by our Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\u003cspan lang=\"EN-AU\" data-mce-fragment=\"1\"\u003eImproved Boost Holding\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eSince electronic OEM diverter valves first appeared in the mid-2000s, there have been many revisions over the years in an attempt to address reliability issues. Whilst the latest generation of OEM diverter valves have become more reliable, there is always a performance trade-off due to their operational method and plastic construction.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eWhen GFB engineers performed boost leak testing on the OEM diverter valve in a VW Mk8 Golf R, they found the leak was significantly larger than in earlier generations.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis excessive leaking is due to the emerging trend of manufacturers mounting diverter valves remotely on plastic piping rather than directly on the turbocharger. A plastic valve mechanism closing onto a plastic seat resulted in the largest OEM diverter valve leak we’ve seen yet at 28L\/min at 1 Bar of boost.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eEven with the Viton face seal (featured on all DV+ pistons), the plastic OEM seat face was found to be so uneven that it was impossible to achieve a reliable seal. The T9380 successfully addresses this issue by incorporating an integral piston seat machined into its body. This design ensures a proper seal, even on uneven plastic OEM seats.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eSharper throttle response, faster boost recovery after brief throttle lift\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eFactory electronic diverter valves are binary in operation – they’re either open or shut. Your throttle, however, isn’t. When you make small throttle adjustments, the binary operation of the factory diverter results in abrupt changes in power delivery, which is the very definition of poor throttle response.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe DV+ patented “pilot actuation” system allows the piston to open and close progressively, thereby smoothing the power delivery during throttle modulation, and ultimately improving throttle response.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eUnrivalled longevity, backed by our Lifetime Warranty\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe combination of precision manufacturing, attention to detail, and robust materials mean the DV+ will last a lifetime. So does the warranty!\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"GFB","offers":[{"title":"Default Title","offer_id":43698010816674,"sku":"T9380","price":242.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/T9380.jpg?v=1695394130"},{"product_id":"034-motorsport-high-pressure-fuel-pump-piston-upgrade-kit-audi-porsche-2-9t-3-0t-tfsi-ea839","title":"034 Motorsport High Pressure Fuel Pump Piston Upgrade Kit - Audi \/ Porsche \/ 2.9T \/ 3.0T TFSI (EA839)","description":"\u003ch3\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cp\u003eThe 034Motorsport High Pressure Fuel Pump Piston Upgrade Kit is designed to be a drop-in replacement piston for the factory high pressure fuel pump for the 2.9T and 3.0T TFSI EA839 engines found in the B9\/B9.5 Audi S4\/S5\/SQ5\/RS5, C8 Audi A6\/A7\/S6\/S7, and 4M.5 Audi Q7\/Q8.\u003cbr\u003e\u003cbr\u003eBy upgrading the factory high pressure fuel pump with the 034Motorsport High Pressure Fuel Pump Piston Upgrade Kit, the factory fueling limits are raised by up to 37% in 2.9T or 3.0T EA839 engines. This increased flow allows the fuel system to meet the higher demands for ethanol, race gas, more pump gas, and pairs perfectly with all Dynamic+ ECU software that requires an upgraded High Pressure Fuel Pump!\u003c\/p\u003e\n\u003ch3\u003eFEATURES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eYields up to 37% Flow Increase Over the Factory High Pressure Fuel Pump\u003c\/li\u003e\n\u003cli\u003eIncreased Piston Diameter\n\u003cul\u003e\n\u003cli\u003eStock Piston: 10.00mm\u003c\/li\u003e\n\u003cli\u003e034Motorsport Piston: 11.67mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eRaises the Factory Fueling Limits Present in 2.9T and 3.0T Engines\u003c\/li\u003e\n\u003cli\u003eIncreased Flow to Meet the Demands of E85 Optimized Tunes and Turbo Upgrades\u003c\/li\u003e\n\u003cli\u003eRequired for Most Stage 1+, 2+, and Stage 3 Performance Software\u003c\/li\u003e\n\u003cli\u003eFuel Pump Internals Precision-Machined to Aerospace Tolerances\u003c\/li\u003e\n\u003cli\u003eDLC Coated Piston and Cylinder for Reduced Friction and Increased Performance\u003c\/li\u003e\n\u003cli\u003eMatched Piston and Cylinder for Absolute Precision\u003c\/li\u003e\n\u003cli\u003eRelatively Easy Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWHAT’S INCLUDED:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1x Pump Piston \u0026amp; Cylinder Set\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFITMENT:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2018 - Present Audi S4 3.0T\u003c\/li\u003e\n\u003cli\u003e2018 - Present Audi S5 3.0T\u003c\/li\u003e\n\u003cli\u003e2018 - Present Audi SQ5 3.0T\u003c\/li\u003e\n\u003cli\u003e2018 - Present Audi RS5 2.9T\u003c\/li\u003e\n\u003cli\u003e2019 - Present Audi A6 3.0T\u003c\/li\u003e\n\u003cli\u003e2019 - Present Audi A7 3.0T\u003c\/li\u003e\n\u003cli\u003e2019 - Present Audi S6 2.9T\u003c\/li\u003e\n\u003cli\u003e2019 - Present Audi S7 2.9T\u003c\/li\u003e\n\u003cli\u003e2019 - Present Audi Q8 3.0T\u003c\/li\u003e\n\u003cli\u003e2020 - Present Audi Q7 3.0T\u003c\/li\u003e\n\u003cli\u003e2019 - Present Porsche Macan Turbo 2.9T\u003c\/li\u003e\n\u003cli\u003e2020 - Present Porsche Macan GTS 2.9T\u003c\/li\u003e\n\u003cli\u003e2021 - Present Porsche Macan S 2.9T\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":43843523313826,"sku":"034-106-6054","price":570.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/034motorsport-high-pressure-fuel.jpg?v=1699732709"},{"product_id":"034-motorsport-boost-tap-kit-audi-3-0t-ea839-b9-b9-5-s4-s5-sq5","title":"034 Motorsport Boost Tap Kit - Audi \/ 3.0T \/ EA839 \/ B9 \/ B9.5 \/ S4 \/ S5 \/ SQ5","description":"\u003cbr\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe 034Motorsport Boost Tap Kit for the EA839 powered B9\/B9.5 S4\/S5\/SQ5 is designed to be a simple, drop-in unit for easy access to monitoring engine boost and vacuum levels. Engineered to replace the factory spacer between the throttle body and charge pipe, this billet aluminum boost tap will never warp or crack.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 034Motorsport Boost Tap Kit is an ideal solution for those running boost gauges.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFEATURES:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e6061-T6 Billet Aluminum Construction\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBlack Anodized Finish for Durability and Long Lasting Great Looks\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1\/8” Nipple for Securing Hose for Boost Gauge\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2 Ports Allows for Multiple Add-On Options:\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBoost Gauge\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTemperature Sensor\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWater-Meth Injection\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNOS Injection\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo Need to Modify Your Charge Pipes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEngineered to be a Direct, Drop-In Unit\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy, Straightforward Installation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo Modification Required!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eWHAT’S INCLUDED:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e034Motorsport Billet Aluminum Boost Tap\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e2x) 1\/8NPT Plug\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1x) 1\/8NPT to 1\/8 Barb Fitting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":43869316251810,"sku":"034-111-Z019","price":115.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/boost-tap-kit-audi-b9-b9-5-s4-s5.jpg?v=1700673625"},{"product_id":"034-motorsport-dynamic-sway-bar-kit-audi-c8-a6-a7-s6-s7-allroad","title":"034 Motorsport Dynamic+ Sway Bar Kit - Audi \/ C8 \/ A6 \/ A7 \/ S6 \/ S7 \/ Allroad","description":"\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cp\u003eThe 034Motorsport Dynamic+ Sway Bar Kit is available for C8 Audi A6\/S6\/Allroad \u0026amp; A7\/S7. The 034Motorsport Dynamic+ Sway Bar Kit features perfectly-matched front and rear sway bars made from high-quality spring steel for maximum rigidity and durability.\u003cbr\u003e\u003cbr\u003eDesigned to reduce body roll, improve turn in, reduce understeer and enhance steering feel, 034Motorsport's Dynamic+ Sway Bar Kit is the ideal upgrade for those in search of confidence-inspiring handling on the street and track.\u003c\/p\u003e\n\u003ch3\u003eFRONT SWAY BAR FEATURES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-Way Adjustable\n\u003cul\u003e\n\u003cli\u003eSoft Setting - 122% Increased Sway Bar Rate\u003c\/li\u003e\n\u003cli\u003eFirm Setting - 155% Increased Sway Bar Rate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e(Rate Comparisons to Factory 30mm Hollow Front Sway Bar, 2.0mm Wall Thickness)\u003c\/li\u003e\n\u003cli\u003e32mm Diameter\u003c\/li\u003e\n\u003cli\u003eHollow Design with Thicker Walls Compared to Factory Bar\u003c\/li\u003e\n\u003cli\u003eBlack Powder Coating for Durability and Stealthy Appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eREAR SWAY BAR FEATURES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2-Way Adjustable\n\u003cul\u003e\n\u003cli\u003eSoft Setting - 626% Increased Sway Bar Rate\u003c\/li\u003e\n\u003cli\u003eFirm Setting - 716% Increased Sway Bar Rate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e(Rate Comparisons to Factory A6 20.6mm Hollow Rear Sway Bar, 2.2mm Wall Thickness)\u003c\/li\u003e\n\u003cli\u003e30mm Diameter\u003c\/li\u003e\n\u003cli\u003eOne-Piece Design with Solid Spring Steel Construction\u003c\/li\u003e\n\u003cli\u003eBlack Powder Coating for Durability and Stealthy Appearance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWHAT'S INCLUDED:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e034Motorsport 32mm Adjustable Front Sway Bar Upgrade\u003c\/li\u003e\n\u003cli\u003e034Motorsport 30mm Solid Adjustable Rear Sway Bar Upgrade\u003c\/li\u003e\n\u003cli\u003ePolyurethane Sway Bar Bushings\u003c\/li\u003e\n\u003cli\u003eBillet Aluminum Sway Bar Brackets with Integrated Zerk Fittings\u003c\/li\u003e\n\u003cli\u003eInstallation Hardware Kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOE PART INTERCHANGE:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOE Front Bar: 4K0 411 309 L (28mm)\u003c\/li\u003e\n\u003cli\u003eOE Rear Bar: 4N0 511 305 AA (20.2mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e For lowered vehicles, always check all clearances over the full articulation of the suspension in order to identify possible interference. We recommend running 034Motorsport suspension components, as they have been designed and tested to work together, without interference.\u003cbr\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":43869405413538,"sku":"034-402-1031","price":1280.16,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/034motorsport-dynamic-plus-sway_b1e7e228-0432-4ee5-90ee-0d39da622d9a.jpg?v=1700675359"},{"product_id":"034motorsport-superduper-turbo-inlet-pipe-audi-3-0t-b9-b9-5-s4-s5-sq5","title":"034Motorsport SuperDuper Turbo Inlet Pipe - Audi \/ 3.0T \/ B9 \/ B9.5 \/ S4 \/ S5 \/ SQ5","description":"\u003cbr\u003e\u003cpicture data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.034motorsport.com\/media\/wysiwyg\/intake-product-pages\/turbo-inlet-system-installed.jpg\" alt=\"Turbo Inlet System Installed\" sizes=\"(max-width: 320px) 320px, (max-width: 480px) 480px, (max-width: 768px) 768px, (max-width: 1024px) 1024px, (max-width: 1200px) 1200px, 1400px\" srcset=\"https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/intake-product-pages\/turbo-inlet-system-installed-1200x651.jpg 1200w, https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/intake-product-pages\/turbo-inlet-system-installed-1024x555.jpg 1024w, https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/intake-product-pages\/turbo-inlet-system-installed-768x416.jpg 768w, https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/intake-product-pages\/turbo-inlet-system-installed-480x260.jpg 480w, https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/intake-product-pages\/turbo-inlet-system-installed-320x173.jpg 320w, \/media\/wysiwyg\/intake-product-pages\/turbo-inlet-system-installed.jpg 1400w\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.034motorsport.com\/media\/wysiwyg\/intake-product-pages\/turbo-inlet-system-installed.jpg\"\u003e\u003c\/picture\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe 034Motorsport SüperDüper Turbo Inlet Pipe Kits for the EA839 3.0T powered Audi S4\/S5\/SQ5 are an essential upgrade to optimize power by eliminating a critical flow restriction in the intake tract when running Stage 3 Hybrid Turbochargers. The massive 85mm 034Motorsport SüperDüper Turbo Inlet Pipe is designed to maximize performance for Dynamic+ Stage 3 Hybrid Turbo Tuning Software. The CNC machined edge retains the silicone hose securely to the turbo inlet pipe. The final touch is an embossed 034 logo to show unsuspecting car show attendees that you value substantive modifications on your 3.0T powered Audi.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eCONVERSION KITS:\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe SüperDüper Turbo Inlet Pipe Conversion Kits are designed to work with the 034Motorsport S34, X34 \u0026amp; P34 Intakes for B9\/B9.5 S4\/S5, and S34 \u0026amp; X34 for B9\/B9.5 SQ5 Intakes to convert them from a stock turbo sized inlet to our larger SüperDüper Turbo Inlet Pipe. The massive SüperDüper Turbo Inlet Pipe requires these larger intake components to maximize the airflow of your existing 034Motorsport Intake Systems.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e \u003cbr data-mce-fragment=\"1\"\u003e\u003c\/p\u003e\n\u003cpicture data-mce-fragment=\"1\"\u003e\u003csource sizes=\"(max-width: 320px) 320px, (max-width: 480px) 480px, (max-width: 768px) 768px, (max-width: 1024px) 1024px, (max-width: 1200px) 1200px, (max-width: 1800px) 1800px, 1920px\" srcset=\"https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/fishpig\/resp\/wysiwyg\/intake-product-pages\/silicone-vs-carbon-1800x837.webp 1800w, https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/fishpig\/resp\/wysiwyg\/intake-product-pages\/silicone-vs-carbon-1200x558.webp 1200w, https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/fishpig\/resp\/wysiwyg\/intake-product-pages\/silicone-vs-carbon-1024x476.webp 1024w, https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/fishpig\/resp\/wysiwyg\/intake-product-pages\/silicone-vs-carbon-768x357.webp 768w, https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/fishpig\/resp\/wysiwyg\/intake-product-pages\/silicone-vs-carbon-480x223.webp 480w, https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/fishpig\/resp\/wysiwyg\/intake-product-pages\/silicone-vs-carbon-320x149.webp 320w, https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/wysiwyg\/intake-product-pages\/silicone-vs-carbon.webp 1920w\" type=\"image\/webp\" data-mce-fragment=\"1\"\u003e\u003cimg src=\"https:\/\/www.034motorsport.com\/media\/wysiwyg\/intake-product-pages\/silicone-vs-carbon.jpg\" alt=\"Silicone vs Carbon Comparison\" sizes=\"(max-width: 320px) 320px, (max-width: 480px) 480px, (max-width: 768px) 768px, (max-width: 1024px) 1024px, (max-width: 1200px) 1200px, (max-width: 1800px) 1800px, 1920px\" srcset=\"https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/intake-product-pages\/silicone-vs-carbon-1800x837.jpg 1800w, https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/intake-product-pages\/silicone-vs-carbon-1200x558.jpg 1200w, https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/intake-product-pages\/silicone-vs-carbon-1024x476.jpg 1024w, https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/intake-product-pages\/silicone-vs-carbon-768x357.jpg 768w, https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/intake-product-pages\/silicone-vs-carbon-480x223.jpg 480w, https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/intake-product-pages\/silicone-vs-carbon-320x149.jpg 320w, \/media\/wysiwyg\/intake-product-pages\/silicone-vs-carbon.jpg 1920w\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.034motorsport.com\/media\/wysiwyg\/intake-product-pages\/silicone-vs-carbon.jpg\"\u003e\u003c\/picture\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\n\u003cdiv class=\"col-2\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"col2-set\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"col-1\" data-mce-fragment=\"1\"\u003e\n\u003cdiv class=\"std\" data-mce-fragment=\"1\"\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFEATURES:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCast from A356 Aluminum\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCompressor Inlet Flange Adapter Machined for Smooth Airflow Into Compressor Housing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCNC Machined 6061-T6 Aluminum Turbo Inlet Adapter to Match Turbo Inlet for Maximum Airflow\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncludes Stock Turbo Inlet Adapter Ring, Optional Adapter Rings Available\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eIncreased Flow Over Factory Turbo Inlet\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCNC Machined\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEdge Retains Intake Coupler Securely\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRetain OE PCV Hose\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTo Retain Factory Wiring Harness Retention Clips\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eProven Power\/Torque, and Airflow Gains\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStock Turbo Inlet: 396CFM @ 28\"H²O\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e034 SüperDüper Turbo Inlet Pipe w\/ 54mm Stock Turbo Adapter: 452 CFM @ 28\"H²O\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e034 SüperDüper Turbo Inlet Pipe w\/ 61.2mm TS2 Turbo Adapter: 563 CFM @ 28\"H²O\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e034 SüperDüper Turbo Inlet Pipe w\/ 63mm Pure 750 Turbo Adapter: 603 CFM @ 28\"H²O\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e034 SüperDüper Turbo Inlet Pipe w\/ 66mm TTE710\/TTE810 Turbo Adapter: 617 CFM @ 28\"H²O\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSlotted Lower Turbo Inlet Bolt for Easy Installation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDirect Bolt-on Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cpicture data-mce-fragment=\"1\"\u003e\u003c\/picture\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"col-2\" data-mce-fragment=\"1\"\u003e\u003cpicture data-mce-fragment=\"1\"\u003e\u003csource class=\"rt-hide\" sizes=\"(max-width: 320px) 320px, (max-width: 480px) 480px, (max-width: 768px) 768px, (max-width: 1024px) 1024px, 1200px\" srcset=\"https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/fishpig\/resp\/wysiwyg\/intake-product-pages\/turbo-inlet-mockup-1024x1024.webp 1024w, https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/fishpig\/resp\/wysiwyg\/intake-product-pages\/turbo-inlet-mockup-768x768.webp 768w, https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/fishpig\/resp\/wysiwyg\/intake-product-pages\/turbo-inlet-mockup-480x480.webp 480w, https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/fishpig\/resp\/wysiwyg\/intake-product-pages\/turbo-inlet-mockup-320x320.webp 320w, https:\/\/www.034motorsport.com\/media\/fishpig\/webp\/wysiwyg\/intake-product-pages\/turbo-inlet-mockup.webp 1200w\" type=\"image\/webp\" data-mce-fragment=\"1\"\u003e\u003cimg class=\"rt-hide\" src=\"https:\/\/www.034motorsport.com\/media\/wysiwyg\/intake-product-pages\/turbo-inlet-mockup.jpg\" alt=\"Turbo Inlet Mockup\" width=\"450\" sizes=\"(max-width: 320px) 320px, (max-width: 480px) 480px, (max-width: 768px) 768px, (max-width: 1024px) 1024px, 1200px\" srcset=\"https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/intake-product-pages\/turbo-inlet-mockup-1024x1024.jpg 1024w, https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/intake-product-pages\/turbo-inlet-mockup-768x768.jpg 768w, https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/intake-product-pages\/turbo-inlet-mockup-480x480.jpg 480w, https:\/\/www.034motorsport.com\/media\/fishpig\/resp\/wysiwyg\/intake-product-pages\/turbo-inlet-mockup-320x320.jpg 320w, \/media\/wysiwyg\/intake-product-pages\/turbo-inlet-mockup.jpg 1200w\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/www.034motorsport.com\/media\/wysiwyg\/intake-product-pages\/turbo-inlet-mockup.jpg\"\u003e\u003c\/picture\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eOE PART INTERCHANGE:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e06M 129 665 AL\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e06M 129 041\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eWHAT’S INCLUDED:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSüperDüper Turbo Inlet Pipe\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eStock Turbo Adapter Ring, with O-rings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eAll Necessary Hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"SuperDuper Turbo Inlet Pipe","offer_id":43869413933218,"sku":"034-108-5036","price":259.2,"currency_code":"CAD","in_stock":true},{"title":"S4\/S5 P34 Conversion Kit + Turbo Inlet","offer_id":43869413965986,"sku":"034-108-5043","price":360.0,"currency_code":"CAD","in_stock":true},{"title":"S4\/S5 X34 Conversion Kit + Turbo Inlet","offer_id":43869413998754,"sku":"034-108-5042","price":463.68,"currency_code":"CAD","in_stock":true},{"title":"SQ5 X34 Conversion Kit + Turbo Inlet","offer_id":43869414031522,"sku":"034-108-5045","price":463.68,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/superduper-turbo-inlet-pipe-audi.jpg?v=1700675754"},{"product_id":"034motorsport-high-output-ignition-coil-ea8xx-engines-vw-audi-gen3-evo4-1-8t-2-0t-2-5t-3-0t-more","title":"034Motorsport High Output Ignition Coil EA8XX Engines - VW\/Audi \/ Gen3 \/ EVO4 \/ 1.8T \/ 2.0T \/ 2.5T \/ 3.0T \/ \u0026 More","description":"\u003cbr\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eProduct Description\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe 034Motorsport Ignition Coils are designed to be a Higher Output, direct plug-and-play upgrade from OE ignition coils with improved heat dissipation via the integrated CNC-Machined heat sinks and offer unique, colorful styling.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 034Motorsport High Output Ignition Coils offer a 10% increase in energy output which is perfect for those looking to maximize output from their stock or modified cars. With integrated CNC-machined heat sinks, any excess heat can be transferred from the ignition coil, further improving the performance of the coils. Crucially, 034Motorsport High Output Ignition Coils are available in red or yellow to show everyone at the local car meet that you value performance in the streets, the sheets, and the track!\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eFor 6 Cylinder applications like the B9\/B9.5 EA839 3.0T and 2.9TT engines, the factory engine harness sits atop the factory ignition coils, reducing airflow across the coils. With the selection of our Pack of 6, we include Billet Aluminum harness bracket spacers to raise the harness off of the ignition coils without adding strain to the wiring harness, allowing for proper space between the wiring harness and the heat sinks.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFeatures:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e10% Increase in Energy Output over Stock Ignition Coils\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCNC-Machined Heat Sink for Better Heat Dissipation\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eRed or Yellow Housing with 034 Logo\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDirect Plug-And-Play\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEngine Harness Mounting Spacers included with Pack of 6 for V6 engines to Allow for Proper Airflow Across Heat Sinks (*Must Select Pack of 6 for these to be included, required for all EA839 V6 engines!*)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003e\u003cbr\u003eReplaces OE numbers\u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e:\u003c\/span\u003e\n\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003e06J-905-110-D \/ 06J905110 D \/ 06J 905 110 D \/ 06J905110D\u003cbr\u003e\u003cbr\u003e06J-905-110-E \/ 06J905110 E \/ 06J 905 110 E \/ 06J905110E\u003cbr\u003e\u003cbr\u003e06K-905-110-D \/ 06K905110 D \/ 06K 905 110 D \/ 06K905110D\u003cbr\u003e\u003cbr\u003e06J-905-110-F \/ 06J905110 F \/ 06J 905 110 F \/ 06J905110F\u003cbr\u003e\u003cbr\u003e06J-905-110-G \/ 06J905110 G \/ 06J 905 110 G \/ 06J905110G\u003cbr\u003e\u003cbr\u003e06H-905-110-G \/ 06H905110 G \/ 06H 905 110 G \/ 06H905110G\u003cbr\u003e\u003cbr\u003e06J-905-110-K \/ 06J905110 K \/ 06J 905 110 K \/ 06J905110K\u003cbr\u003e\u003cbr\u003e06H-905-110-H \/ 06H905110 H \/ 06H 905 110 H \/ 06H905110H\u003cbr\u003e\u003cbr\u003e06H-905-110-L \/ 06H905110 L \/ 06H 905 110 L \/ 06H905110L\u003cbr\u003e\u003cbr\u003e06J-905-110-N \/ 06J905110 N \/ 06J 905 110 N \/ 06J905110N\u003cbr\u003e\u003cbr\u003e06H-905-110-L \/ 06H905110 L \/ 06H 905 110 L \/ 06H905110L\u003cbr\u003e\u003cbr\u003e06H-905-110-P \/ 06H905110 P \/ 06H 905 110 P \/ 06H905110P\u003cbr\u003e\u003cbr\u003e06H-905-110-G \/ 06H905110 G \/ 06H 905 110 G \/ 06H905110G\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"1 Ignition Coil - Red","offer_id":43869419798690,"sku":"034-107-2012-RED","price":84.96,"currency_code":"CAD","in_stock":true},{"title":"1 Ignition Coil - Yellow","offer_id":43869419831458,"sku":"034-107-2012-YLW","price":81.51,"currency_code":"CAD","in_stock":true},{"title":"4 Ignition Coils - Red","offer_id":43869419864226,"sku":"034-107-2012-RED-KT4","price":314.6,"currency_code":"CAD","in_stock":true},{"title":"4 Ignition Coils - Yellow","offer_id":43869419896994,"sku":"034-107-2012-YLW-KT4","price":314.6,"currency_code":"CAD","in_stock":true},{"title":"5 Ignition Coils - Red","offer_id":43869419929762,"sku":"034-107-2012-RED-KT5","price":388.96,"currency_code":"CAD","in_stock":true},{"title":"5 Ignition Coils - Yellow","offer_id":43869419962530,"sku":"034-107-2012-YLW-KT5","price":388.96,"currency_code":"CAD","in_stock":true},{"title":"6 Ignition Coils + V6 Harness Spacers - Red","offer_id":43869419995298,"sku":"034-107-2012-RED-KT6","price":467.61,"currency_code":"CAD","in_stock":true},{"title":"6 Ignition Coils + V6 Harness Spacers - Yellow","offer_id":43869420028066,"sku":"034-107-2012-YLW-KT6","price":467.61,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/high-output-ignition-coil-ea8xx.jpg?v=1700675917"},{"product_id":"034-motorsport-turbo-inlet-pipe-audi-3-0t-b9-b9-5-s4-s5-sq5","title":"034 Motorsport Turbo Inlet Pipe - Audi \/ 3.0T \/ B9 \/ B9.5 \/ S4 \/ S5 \/ SQ5","description":"\u003ch4\u003eThe EA839 3.0T Turbo Inlet Pipe is designed to work with OEM-sized intake hoses. The CNC machined edge retains the intake hose securely to the turbo inlet pipe. The final touch is an embossed 034 logo to show unsuspecting car show attendees that you value substantive modifications on your 3.0T powered Audi.\u003c\/h4\u003e\n\u003ch3\u003eFEATURES:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCast from A356 Aluminum\u003c\/li\u003e\n\u003cli\u003eCompressor Inlet Flange Adapter Machined for Smooth Airflow Into Compressor Housing\u003c\/li\u003e\n\u003cli\u003eCNC Machined 6061-T6 Aluminum Turbo Inlet Adapter to Match Turbo Inlet for Maximum Airflow - Stock Turbo - 54.0mm\u003c\/li\u003e\n\u003cli\u003eOptional Adapter ring available separately: Pure750 Turbo - 63.0mm (034-108-Z094)\u003c\/li\u003e\n\u003cli\u003eIncreased Flow Over Factory Turbo Inlet\u003c\/li\u003e\n\u003cli\u003eCNC Machined Edge Retains Intake Coupler Securely\u003c\/li\u003e\n\u003cli\u003eCNC Machined to Retain OE PCV Hose\u003c\/li\u003e\n\u003cli\u003eProven Power\/Torque, and Airflow Gains\n\u003cul\u003e\n\u003cli\u003eStock Turbo Inlet: 396 CFM @ 28\"H²O\u003c\/li\u003e\n\u003cli\u003e034 Turbo Inlet Pipe w\/ Stock Turbo Adapter: 432 CFM @ 28\"H²O\u003c\/li\u003e\n\u003cli\u003e034 Turbo Inlet Pipe w\/ Pure 750 Turbo Adapter: 490 CFM @ 28\"H²O\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSlotted Lower Turbo Inlet Bolt for Easy Installation\u003c\/li\u003e\n\u003cli\u003eDirect Bolt-on Installation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eOE PART INTERCHANGE:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e06M 129 665 AL\u003c\/li\u003e\n\u003cli\u003e06M 129 041\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eWHAT’S INCLUDED:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eTurbo Inlet Pipe\u003c\/li\u003e\n\u003cli\u003eTurbo Adapter Ring, with O-rings - 54mm for OE Turbo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cspan data-mce-fragment=\"1\"\u003eDownload Installation Guide\u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"http:\/\/urotuned.com\/InstallPDFs\/034-108-5012_Install_Instructions.pdf\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0005\/7773\/2663\/files\/PDF.png?v=1613185396\" data-mce-fragment=\"1\"\u003e\u003c\/a\u003e\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":43869420126370,"sku":"034-108-5012","price":220.32,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/turbo-inlet-pipe-b9-b9-5-audi-s4.jpg?v=1700675919"},{"product_id":"034-motorsport-billet-oil-filter-housing-audi-ea839-v6-2-9t-3-0t","title":"034 Motorsport Billet Oil Filter Housing - Audi \/ EA839 \/ V6 \/ 2.9T \/ 3.0T","description":"\u003cbr\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003ePRODUCT DESCRIPTION:\u003c\/h3\u003e\n\u003cp data-mce-fragment=\"1\"\u003eLooking to increase the reliability and integrity of your oil filter housing, and spruce up your engine bay as a bonus? The 034Motorsport Billet Oil Filter Housing for EA839 2.9T \u0026amp; 3.0T Engines is designed to replace your factory plastic oil filter housing which is prone to warping and cracking. The 034Motorsport Billet Oil Filter Housing is CNC machined from 6061-T6 aluminum and is anodized bright black for lifelong great looks. Transform the engine bay of your EA839 equipped car with the beautiful and sexy 034Motorsport Billet Oil Filter Housing.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThis Billet Oil Filter Housing is a direct replacement for the plastic factory oil filter housing for true OEM+ fitment.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFEATURES:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCNC Machined from Billet 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDirect Replacement for OE Part\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUses the Factory Engine Oil Filter for Simplicity and Ease of Replacement\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBright Black Anodized for LifeLong Great Looks\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eWill Not Crack Like Plastic Housings\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eWHAT’S INCLUDED:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e1x Billet Oil Filter Housing\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003ePART CROSS REFERENCE:\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e06M 115 311 E\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":43869449683106,"sku":"034-110-9003","price":205.92,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/034motorsport-billet-oil-filter.jpg?v=1700677035"},{"product_id":"cts-turbo-b-cool-oil-filter-housing-audi-c8-b9-4m-a6-s4-s5-sq5-sq7","title":"CTS Turbo B-Cool Oil Filter Housing - Audi \/ C8 \/ B9 \/ 4M \/ A6 \/ S4 \/ S5 \/ SQ5 \/ SQ7","description":"\u003cp data-mce-fragment=\"1\"\u003e\u003cbr\u003eCTS Turbo is proud to announce our B-Cool Oil filter housing for Audi EA839 2.9T\/3.0T\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003eConstructed from 6061-T6 aluminum and finished with a sleek black anodized coating, this housing offers superior reliability and performance. Designed as a direct replacement for the OEM oil filter housing, it provides a seamless upgrade without any modifications required.\u003c\/p\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMachined from Billet 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDirect Replacement\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBlack Anodized\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy Installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003eFitment:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEA839 2.9T\/3.0T Audi B9\/C8\/D5\/4M\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CTS Turbo","offers":[{"title":"Default Title","offer_id":43916753010850,"sku":"CTS-HW-536","price":124.19,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/CTS-HW-536-1.jpg?v=1702579170"},{"product_id":"awe-exhaust-for-c8-audi-a6-a7-3-0t","title":"AWE Exhaust for C8 Audi A6\/A7 3.0T","description":"\u003cp\u003e\u003cstrong\u003e\u003cbr\u003ePresenting the AWE Touring Edition Exhaust for the Audi C8 A6\/A7 3.0T:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e50-state emissions-compliant dual 3” catback exhausts\u003c\/li\u003e\n\u003cli\u003eDyno-proven gains of 12 hp and 6 lb-ft of torque at the wheels\u003c\/li\u003e\n\u003cli\u003eFeatures AWE’s patented drone-canceling 180 Technology®\u003c\/li\u003e\n\u003cli\u003ePost-catalyst downpipes feature factory-matched flanges and robust flex sections to absorb engine movement\u003c\/li\u003e\n\u003cli\u003eImpressive clearance above factory chassis brace AWE electronic valve simulators included\u003c\/li\u003e\n\u003cli\u003eLess is more: clean, straight-through design for maximum performance and tone\u003c\/li\u003e\n\u003cli\u003eProudly engineered, designed, and manufactured in-house, in the USA\u003c\/li\u003e\n\u003cli\u003eFits models with and without rear-wheel steering\u003c\/li\u003e\n\u003cli\u003ePure bolt-on, no-cutting required\u003c\/li\u003e\n\u003cli\u003ePerfect Fitment Guarantee\u003c\/li\u003e\n\u003cli\u003eAWE No CEL Guarantee\u003c\/li\u003e\n\u003cli\u003eLifetime warranty\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\u003cbr\u003e\u003cbr\u003eInstall Instructions can be found \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0240\/7294\/5728\/files\/installation_instructions_awe_Audi_A6_A7_C8_Rev1.3_2023.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e","brand":"AWE Tuning","offers":[{"title":"Default Title","offer_id":43982720237730,"sku":"3015-31003","price":3616.65,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/3015-31003_14.jpg?v=1705703357"},{"product_id":"apr-throttle-booster-controller-and-app-vw-audi","title":"APR Throttle Booster Controller \u0026 App - VW\/Audi","description":"\u003ch5 data-mce-fragment=\"1\" class=\"product__details__section__title\"\u003e\n\u003cbr\u003eDESCRIPTION\u003c\/h5\u003e\n\u003cdiv data-mce-fragment=\"1\" class=\"product__details__section__content\"\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe APR Throttle Booster instantly transforms how your vehicle feels by customizing how quickly your throttle or accelerator pedal works. Plug it in, and either uses the wireless controller or smartphone app to set or customize how the pedal feels. Most people don't like how their throttle pedal feels, and while tuning can help eliminate lag, everyone has a different opinion about how it should feel. This device lets you set it exactly the way you want and allows you to switch between profiles quickly. Set it to stock, sport, extreme, and eco modes easily. Best of all, it's a quick plug-and-play device that can be removed anytime.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch5 class=\"product__details__section__title\"\u003ePRODUCT FEATURES\u003c\/h5\u003e\n\u003cdiv class=\"product__details__section__content\"\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eImproves throttle response and transforms the feel of the vehicle\u003c\/li\u003e\n\u003cli\u003eMultiple switchable profiles including various sport modes, eco modes, and custom maps\u003c\/li\u003e\n\u003cli\u003eCustom throttle mapping allows you to perfectly tune your throttle pedal\u003c\/li\u003e\n\u003cli\u003eThin and classy wireless controller\u003c\/li\u003e\n\u003cli\u003eBluetooth iOS and Android mobile app\u003c\/li\u003e\n\u003cli\u003eNo clunky boxes, wires, or controllers like other devices\u003c\/li\u003e\n\u003cli\u003eConnects to the throttle harness, leaving your OBDII port free\u003c\/li\u003e\n\u003cli\u003eQuick and easy plug-and-play design that is removable without a trace\u003c\/li\u003e\n\u003cli\u003eWorks on gas, diesel, alternative fuel, and electric vehicles\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"APR","offers":[{"title":"Default Title","offer_id":43996877258914,"sku":"EM100050","price":418.37,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/apr_throttlebooster_group.png?v=1706112803"},{"product_id":"apr-carbon-fiber-intake-3-0t-a6-a7-c8-ci100048","title":"APR Carbon Fiber Intake - 3.0T A6 \/ A7 (C8)","description":"\u003cdiv class=\"collapsible-title\"\u003e\n\u003cstrong\u003eOVERVIEW  \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan class=\"slides-in\"\u003e\u003c\/span\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"row-contents active\"\u003e\n\u003cdiv class=\"full_description\"\u003eThis is the ultimate intake upgrade for the Audi A6 Quattro, A6 Allroad, and A7 Sportback 3.0T (C8). It flows 45% more than stock, and reduces pressure drop. This directly translates to +19 AWHP and +17 AWFT-LBS of torque making this a simple upgrade for more power you can feel.\u003c\/div\u003e\n\u003cdiv class=\"full_description\"\u003e\n\u003cbr\u003eOur system is a full upgrade as it replaces all of the intake components from the inlet scoop all the way to the turbo inlets. This is extremely important as focusing on the airbox alone does not address the main restrictions found in the factory intake system. Simply put, our system flows better than stock, makes more power, puts less strain on the turbocharger, looks sexy under the hood with the gorgeous carbon fiber design, and enhances the sound of the engine. \u003cbr\u003e\u003cbr\u003eThe factory turbocharger inlet pipe is a big restriction point because it's small. It's common for most intake systems to only focus on the filter and airbox, but doing so only has minimal impact on performance. Furthermore, upgrading the turbocharger inlet pipe only has minimal impact on performance if it still necks down to with the factory or aftermarket intake airbox. We solve this by making our pipe as large as possible from the 4\" filter outlet all the way to the turbocharger inlet in one piece! This minimizes pressure drop and increases flow through the system far better than a multi-piece solutions.\u003cbr\u003e\u003cbr\u003e Our system is made from carbon fiber and looks absolutely stunning under the hood. By using this material we are able to make the wall-thickness of the tubes smaller, maximizing the internal diameter, increasing performance even more! The material also allows us to make complex organic shapes necessary when working in a tight engine bay. \u003cbr\u003e\u003cbr\u003eThe airbox on this platform is tiny and leaves nearly no room to upgrade the filter. Our system works as a heat shield but is open on the bottom and side to allow for a larger filter and maximum airflow. This keeps air temps down, and increases sound without it being overbearing. The filter is massive as well. A big filter is desirable as increasing filtered surface area keeps the filter breathing easily for many miles as it filters dirt, dust, and particles. It measures 7\" by 7\" with a 5.5\" frontal inlet, and a 4\" outlet. The filter media is a washable pleated cotton gauze that can be cleaned for extended life, or replaced with ease. \u003cbr\u003e\u003cbr\u003eOur kit includes everything you need to bolt on and go. No new tuning is needed, and the product is emissions friendly. We include all the nuts, bolts, and clamps needed for an easy install. Lastly, thanks to our billet turbo inlet adapters, this is the only intake you'll ever need. Should you later upgrade your turbo, new, larger adapters can be installed to adapt to the larger inlets simply by swapping out the billet adapters!\u003cbr\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003ch3\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eFull intake system: Inlet, airbox, filter, and inlet piping\u003c\/li\u003e\n\u003cli\u003e+19 AWHP \u0026amp; +17 AWFT-LBS at the wheels measured over stock\u003c\/li\u003e\n\u003cli\u003eFlows 45% more than stock at 28\" H2O\u003c\/li\u003e\n\u003cli\u003eReduced pressure drop at the turbo inlet\u003c\/li\u003e\n\u003cli\u003eEnhanced engine sound\u003c\/li\u003e\n\u003cli\u003eCarbon fiber construction\u003c\/li\u003e\n\u003cli\u003eTurbo spool faster\u003c\/li\u003e\n\u003cli\u003eTurbo operate more efficiently\u003c\/li\u003e\n\u003cli\u003eMassive 7” x 7” filter with a 4” outlet and 5.5” frontal inlet\u003c\/li\u003e\n\u003cli\u003eHigh flow and washable pleated cotton gauze filter material\u003c\/li\u003e\n\u003cli\u003eAirbox open away from engine to maximize flow and filter size in a restricted space\u003c\/li\u003e\n\u003cli\u003eInlet piping diameter is maximized from the 4” filter all the way to the turbocharger\u003c\/li\u003e\n\u003cli\u003eInlet piping addresses system restriction, unlike competitive airbox systems that are compatible with factory inlet piping\u003c\/li\u003e\n\u003cli\u003eBillet turbo adapter rings make fitting this system to larger turbo possible\u003c\/li\u003e\n\u003cli\u003eEmissions friendly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"APR","offers":[{"title":"Default Title","offer_id":43996878274722,"sku":"CI100048","price":1673.69,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/ci100048_001.jpg?v=1706112860"},{"product_id":"apr-engine-cover-audi-2-9t-3-0t-ea839-ms100255","title":"APR Engine Cover - Audi \/ 2.9T \/ 3.0T \/ EA839","description":"\u003cspan data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003e     \u003cbr\u003e\u003c\/span\u003e\u003c\/span\u003e\n\u003cdiv class=\"full_description\"\u003eThe 2.9T and 3.0T EA839 engine shares a beautiful engine cover platform, but only some of the RS models are upgraded with carbon fiber accents mixed with plastic. All other vehicles are left with a rather underwhelming cover. To fix this, we've done away with the plastic an brough a full carbon fiber engine cover to enhance your engine bay! Our carbon fiber engine cover is drop dead gorgeous. It's a mixture of premium matte carbon fiber, mixed with gloss carbon fiber to give a two tone look that's down right exotic. The overall profile matches the spirt of the factory RS cover to give it an OEM+ look that doesn't appear gaudy or out of place. Right highlights down the sides give it an extra pop that's sure to turn heads, and the world renowned APR logo plat lets everyone know it's a premium upgrade. The cover looks great with the factory intake, but really shines with the APR Carbon Fiber Intake System. Simply plug and play this upgrade with no tools necessary. Of course, it doesn't affect emissions, and some on the internet have even suggested it may add horsepower, at least more than stickers do, but we have not verified this claim. Get yours today and GOAPR!\u003cbr\u003e  \u003c\/div\u003e\n\u003ch3\u003eFeatures:   \u003c\/h3\u003e\n\u003cul class=\"productpage_list\"\u003e\n\u003cli\u003eSignificantly enhances the appearance of the engine bay\u003c\/li\u003e\n\u003cli\u003eGorgeous gloss and matte carbon fiber twill with red accents\u003c\/li\u003e\n\u003cli\u003eFeatures the world renowned APR logo that’s sure to turn heads and delight\u003c\/li\u003e\n\u003cli\u003eReduces weight by 32% over stock (RS5 Carbon Fiber version)\u003c\/li\u003e\n\u003cli\u003eEnhances vehicle performance with weight reduction\u003c\/li\u003e\n\u003cli\u003eReduces weight over the front axles\u003c\/li\u003e\n\u003cli\u003eOptimizes weight distribution\u003c\/li\u003e\n\u003cli\u003ePlug and play upgrade with no tools necessary\u003c\/li\u003e\n\u003cli\u003eReplaces the factory engine cover\u003c\/li\u003e\n\u003cli\u003eMatches the APR Carbon Fiber Intake System\u003c\/li\u003e\n\u003cli\u003eLikely adds more horsepower than stickers (unverified)\u003c\/li\u003e\n\u003cli\u003eEmissions compliant\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"APR","offers":[{"title":"Default Title","offer_id":43996878602402,"sku":"MS100255","price":1370.09,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/MS1002552.jpg?v=1706112884"},{"product_id":"quietcast-brake-pads-vw-audi-4m0698151bd-bos","title":"Quietcast Brake Pads - VW\/Audi","description":"Bosch QuietCast Brake Pads\u003cbr\u003e\u003cbr\u003eWith its roots dating back to 1886, Bosch is a well-established German company famous for its innovative and high-quality automotive components.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOE Part # 4M0698151BD\u003cbr\u003e\u003cbr\u003eBosch Part # BP1894","brand":"Bosch","offers":[{"title":"Default Title","offer_id":44003289694370,"sku":"4M0698151BD-BOS","price":85.5,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/BS_BP1894_Rig.jpg?v=1706311698"},{"product_id":"quietcast-brake-pads-vw-audi-bc1898-bos","title":"Quietcast Brake Pads - VW\/Audi","description":"Bosch QuietCast Brake Pads\u003cbr\u003e\u003cbr\u003eWith its roots dating back to 1886, Bosch is a well-established German company famous for its innovative and high-quality automotive components.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBosch Part # BC1898","brand":"Bosch","offers":[{"title":"Default Title","offer_id":44003289858210,"sku":"BC1898-BOS","price":51.2,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/boschnoimage_bdff164d-ed17-41b9-81a2-38bad37a15ba.jpg?v=1706311704"},{"product_id":"quietcast-brake-pads-vw-audi-bc1894-bos","title":"Quietcast Brake Pads - VW\/Audi","description":"Bosch QuietCast Brake Pads\u003cbr\u003e\u003cbr\u003eWith its roots dating back to 1886, Bosch is a well-established German company famous for its innovative and high-quality automotive components.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eBosch Part # BC1894","brand":"Bosch","offers":[{"title":"Default Title","offer_id":44003289923746,"sku":"BC1894-BOS","price":67.1,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/boschnoimage_0c670779-02e3-4663-b733-ca1654e8bd70.jpg?v=1706311706"},{"product_id":"racingline-oil-catch-can-system-audi-b9-s4-s5-sq5-vwr131000","title":"Racingline Oil Catch Can System - Audi \/ B9 \/ S4 \/ S5 \/ SQ5","description":"\u003cbr\u003e\n\u003cp class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003e\u003cspan class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003eNot all catch can kits are equal! RacingLine’s stunning Oil Catch Can System is designed exclusively for the Audi’s B9-platform S4, S5 \u0026amp; SQ5, plus other Audi models fitted with the 3.0 TFSI V6T (EA839) motor.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003eRacingLine’s V6T Catch Can System replaces the factory PCV with a gloss black billet PCV replacement block. This features two internally-baffled separator turrets and also deletes the failure-prone factory PCV check-valve. The new PCV block also incorporates a beautiful billet oil filler cap – not only pleasing to use, but ensures no more oil 'weeping' from the factory plastic cap.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003eThe PCV block feeds to the Catch Can itself via two -6AN hose lines. These oil lines feature an attractive outer nylon braid strengthened by a stainless steel inner weave for maximum resilience.   \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003eThe Catch Can is constructed from extruded aerospace-grade 6061 aluminum, then CNC machined before being coated in a unique ‘Liquid Titanium’ anodized finish. The Can’s three-way baffled internals effectively collects excess moisture and oil vapor to keep your intercooler and inlet tracts free from long-term oil residue build-up.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003eFor improved engine-efficiency, it ensures cleaner airflow through to the inlet manifold via the breather return hose, connected with a factory-spec ‘Norma’ quick release fitting.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003eThe beautiful Catch Can incorporates pressed-aluminum mountings to locate the can at the rear of engine, adding a great dose of style to your car’s engine bay appearance. It even includes an integrated mount point to retain the factory engine cover.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003eOn top of the can is a dipstick for quick level-checking, and the can allows for easy disassembly for thorough cleaning throughout its life. Fitting is straightforward, and a full fixing kit containing all required bolts \u0026amp; O-Rings is included.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003cspan class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003eAll this ensures that the RacingLine Catch Can System stands the test of time, retains its stunning looks, and most importantly keeps your engine \u0026amp; inlets tracts in the best possible long-term health.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSo What's In The Kit?\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003eReplacement PCV breather plate with oil filler cap\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003e2 x internally-baffled separator turrets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003eBaffled catch tank \u0026amp; oil dipstick\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003e2 x catch can mounting brackets\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003e2 x -6AN hose from separator turrets to catch can\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003eNorma breather return hose from catch can to inlet\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003eFixing kit containing all required bolts \u0026amp; O-Rings\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp class=\"fadxjl9d fa1j37ud\" data-mce-fragment=\"1\"\u003e \u003c\/p\u003e","brand":"Racingline","offers":[{"title":"Default Title","offer_id":44057441829026,"sku":"VWR131000","price":1330.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/untitled_3_583c068d-6b18-4cee-b43d-3cd28dfc0114.jpg?v=1707772568"},{"product_id":"apr-ultralink-at-home-flashing-tuning","title":"APR Ultralink - At Home Flashing Tuning","description":"\u003cdiv class=\"full_description\" data-mce-fragment=\"1\"\u003e\n\u003cbr\u003eTuning your vehicle with APR software has never been easier thanks to the APR Ultralink!\u003cbr\u003e\u003cbr\u003eWith the Ultralink you can tune your vehicle with APR Engine Control Unit (ECU) and APR Transmission Control Unit (TCU) Upgrades right from the convenience of your own home, all on your own! It connects your vehicle directly to the Ultralink Marketplace, which is our online store filled with tens of thousands of tunes supporting most of the vehicles in our catalogue.\u003cbr\u003e\u003cbr\u003eThe Ultralink lets you download and install new engine and transmission tunes, update to new file versions, jump to a new stage, change octanes and program modes, configure adjustable features such as launch control, torque levels, speed limiters, and other features, read and clear fault codes, reset flash counters, and more!\u003cbr\u003e\u003cbr\u003eWe also kept our existing APR software owners in mind when creating the Ultralink. There's no need to purchase a tune twice! Your vehicle is already in our database as an existing customer. And best of all, the Ultralink is completely unlocked. Use it to buy and install software on all your or your friend's vehicles!\u003c\/div\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003e\n\u003cbr\u003eFeatures:\u003c\/h3\u003e\n\u003cul class=\"productpage_list\" data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBuy and tune as many vehicles as you want with one Ultralink device\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo software required - Access, buy, and install over 10,000 in-house developed tunes at ultralink.goapr.com\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMultiple stage tunes offers for most vehicles, including transmission calibrations\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCoverage includes VW, Audi, Porsche, Seat, Skoda, Cupra, Bentley, and Lamborghini vehicles\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNo additional charge for updates, switching octanes, or existing customers who purchased software from an APR dealer\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eNew ECU\/TCU support added monthly (Always check our application guide)\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eUser adjustable features, such as speed limiters, torque output, exhaust sound, and more available on various tunes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReset the flash counter with each APR Tune or uninstall APR Software and go back to stock\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReads and clears fault codes\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCurrently supported markets: USA \u0026amp; Canada\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSubject to ECU or TCU Box Code and Revision Numbers\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003ciframe title=\"APR Ultralink Quickstart Guide\" src=\"https:\/\/www.youtube.com\/embed\/Ht_Lj_UW8dg\" height=\"540\" width=\"960\" allowfullscreen=\"\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" frameborder=\"0\"\u003e\u003c\/iframe\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"APR","offers":[{"title":"Default Title","offer_id":44184959778978,"sku":"EM100040","price":212.45,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/products\/em100040_005.png?v=1709665327"},{"product_id":"034-motorsport-billet-oil-cap-audi-ea839-v6-2-9t-3-0t-034-110-z018","title":"034 Motorsport Billet Oil Cap - Audi \/ EA839 \/ V6 \/ 2.9T \/ 3.0T","description":"\u003cbr\u003e\n\u003cp data-mce-fragment=\"1\"\u003eThe 034Motorsport Billet Oil Cap for EA839 V6 2.9T\/3.0T Engines is designed to replace your factory plastic oil cap. The 034Motorsport Billet Oil Cap is CNC machined from 6061-T6 aluminum and is anodized bright black for lifelong great looks, topped off with a 034Motorsport logo. Transform the engine bay of your EA839 equipped car with the beautiful and sexy 034Motorsport Billet Oil Cap.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003eThe 034Motorsport Billet Oil Cap for EA839 is engineered to have a tighter seal with the factory PCV system to mitigate catastrophic failure in the event the factory breather hose or PCV system fails. When the PCV or breather system has failed, the factory oil cap can loosen or remove itself under high-boost applications, leading to the potential escape of hot oil into the engine bay. The 034Motorsport Billet Oil Cap helps prevent such scenarios by providing a significantly tighter seal, reducing the risk of damage to your engine and car, and providing greater peace of mind for performance enthusiasts.\u003cstrong data-mce-fragment=\"1\"\u003e*\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e034Motorsport does not recommend removing the oil cap by hand when your engine is at operating temperature without using a glove, rag, or removal tool, as it will require some force to remove and may be too hot to touch. 034Motorsport offers an STL file of our Billet Oil Cap Removal Tool, free of charge, for you to 3D print at home. 034Motorsport also offers the dimensions of the Billet Oil Cap so you DIYers can design your own removal tool from wood, metal or any suitable material! If you’ve designed a cool one, let us know by emailing\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca href=\"mailto:social@034motorsport.com\" data-mce-fragment=\"1\" data-mce-href=\"mailto:social@034motorsport.com\"\u003esocial@034motorsport.com\u003c\/a\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eand our team would be happy to showcase it on this product page! The 034Motorsport Billet Oil Cap can be removed by hand when the engine has cooled down.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e\u003cstrong data-mce-fragment=\"1\"\u003e*Note:\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003eThe 034Motorsport Billet Oil Cap is not a fix for the faulty PCV system, but is designed to mitigate the risk of further engine damage and engine fires due to the rapid evacuation of engine oil.\u003c\/p\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eFEATURES:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eCNC Machined from Billet 6061-T6 Aluminum\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eBright Black Anodized for Life Long Great Looks\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eLocks Into Place With a Positive \"Click\"\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEngineered for a Leak-Free Interface When Fitted, Even When Hot\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eReuses OE Seal\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eEasy Fitment; Takes Less Than a Minute to Install\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eDIY Tool Resources to 3D Print or Fabricate\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.034motorsport.com\/docs\/910-0016-tool-oil-cap-removal.STEP\" title=\"STEP Download\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.034motorsport.com\/docs\/910-0016-tool-oil-cap-removal.STEP\"\u003eSTEP Download\u003c\/a\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003ca href=\"https:\/\/www.034motorsport.com\/docs\/910-0016-tool-oil-cap-removal.STL\" title=\"STL Download\" data-mce-fragment=\"1\" data-mce-href=\"https:\/\/www.034motorsport.com\/docs\/910-0016-tool-oil-cap-removal.STL\"\u003eSTL Download\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003ePART INTERCHANGE:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e06M 103 485 C\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e06M 103 485 D\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3 data-mce-fragment=\"1\"\u003eWHAT'S INCLUDED:\u003c\/h3\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003e(1x) Billet Oil Cap\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"034 Motorsport","offers":[{"title":"Default Title","offer_id":44562454642850,"sku":"034-110-Z018","price":210.24,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/034motorsport-billet-oil-cap-ea8_db2d780e-9c9b-4ad6-afec-f38cf1876aa3.jpg?v=1716934428"},{"product_id":"bilstein-19-21-audi-a6-quattro-b4-oe-replacement-shock-absorber-front-19-302591","title":"Bilstein 19-21 Audi A6 Quattro B4 OE Replacement Shock Absorber - Front","description":"\u003cp\u003eBilstein B4 OE Replacement dampers are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":44623241117858,"sku":"19-302591","price":139.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/B5_19302591_Fro.jpg?v=1717961755"},{"product_id":"bilstein-19-20-audi-a6-quattro-b4-oe-replacement-shock-absorber-rear-19-304397","title":"Bilstein 19-20 Audi A6 Quattro B4 OE Replacement Shock Absorber - Rear","description":"\u003cp\u003eBilstein B4 OE Replacement dampers are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":44624960127138,"sku":"19-304397","price":131.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/19-304397_1.jpg?v=1718051393"},{"product_id":"bilstein-19-21-audi-a6-quattro-b4-oe-replacement-shock-absorber-rear-19-303802","title":"Bilstein 19-21 Audi A6 Quattro B4 OE Replacement Shock Absorber - Rear","description":"\u003cp\u003eBilstein B4 OE Replacement dampers are specifically engineered to be the best choice for maintaining the original ride quality of your vehicle, while meeting or exceeding OE standards. These dampers are the ideal choice for the driver looking to restore the original performance and handling of their vehicle, with the added benefit of world-famous Bilstein quality.\u003c\/p\u003e","brand":"Bilstein","offers":[{"title":"Default Title","offer_id":44624969040034,"sku":"19-303802","price":131.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/19-303802_1.jpg?v=1718051698"},{"product_id":"rear-valance-audi-s6-a6-s-line-c8","title":"Maxton Design Rear Valance - Audi \/ C8 \/ S6 \/ A6 \/ S-Line","description":"\u003ch2 style=\"text-align: center;\"\u003e\n\u003cb\u003ePRODUCT DETAILS \u003c\/b\u003e \u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp\u003ePRODUCT VERSION\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp\u003ePRODUCT CODE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp\u003eCOMPATIBLE FIT\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eREAR VALANCE AUDI S6 \/ A6 S-LINE C8\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp\u003e\u003cstrong\u003eAU-A6-C8-SLINE-RS1+RS1R\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003ch4\u003e\u003cspan\u003e\u003cstrong\u003eAudi S6 C8 2020 - \u003c\/strong\u003e\u003c\/span\u003e\u003c\/h4\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cblockquote\u003eMaxton Design products will not only provide visual enhancement, but will also improve aerodynamics of your car by increasing downforce. We ensure perfect fitment of the product by 3D laser scanning every make and model that we design.  \u003c\/blockquote\u003e\n\u003cblockquote\u003e\n\u003cspan\u003eOur parts are made of ABS plastic that is also \u003c\/span\u003e\u003cspan\u003eprimarily \u003c\/span\u003e\u003cspan\u003eused in OEM parts throughout the automotive industry due to its impact, scratch resistance and shock absorbance characteristics. Give you car a new sharp look that will be the envy of all your friends and other drivers. Start your adventure with Maxton Design’s visual tuning that is second to none in unique design and quality. \u003c\/span\u003e\n\u003c\/blockquote\u003e\n\u003ch2 style=\"text-align: center;\"\u003e\u003cb\u003ePRODUCT FEATURES\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eREAR VALANCE MADE OF ABS PLASTIC\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eAVAILABLE IN 2 FINISH STYLES: GLOSS BLACK, TEXTURED BLACK \u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eTHIS PRODUCT HAS BEEN TUV (TUV MATERIALGUTACHTEN) CERTIFIED FOR MATERIAL QUALITY\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003eTHIS PRODUCT IS TREATED WITH UV PROTECTION COATING\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cb\u003e\u003ci\u003eWe highly recommend installation of all our products with professional auto body shops experienced in installation of visual modifications.\u003c\/i\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":44838593822882,"sku":"AU-A6-C8-SLINE-RS1G+RS1RG","price":469.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/eng_pl_Rear-Valance-Audi-S6-A6-S-Line-C8-14264_1.png?v=1723496327"},{"product_id":"front-splitter-v-3-audi-a6-s-line-s6-c8-au-a6-c8-sline-fd1g-fd1rg","title":"Maxton Design Front Splitter V.3 Audi A6 S-Line \/ S6 C8","description":"\u003ch2 style=\"text-align: center;\"\u003e\n\u003cb\u003ePRODUCT DETAILS \u003c\/b\u003e \u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp\u003ePRODUCT VERSION\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp\u003ePRODUCT CODE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp\u003eCOMPATIBLE FIT\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp\u003eFRONT SPLITTER V.3 AUDI A6 S-LINE \/ S6 C8\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cdiv class=\"projector_navigation\"\u003e\n\u003cdiv class=\"proj_code\"\u003e\n\u003cdiv class=\"projector_navigation\"\u003e\n\u003cdiv class=\"proj_code\"\u003e\n\u003cdiv class=\"projector_navigation\"\u003e\n\u003cdiv class=\"proj_code\"\u003e\u003cstrong\u003eAU-A6-C8-SLINE-FD1+FD1R\u003c\/strong\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp class=\"def\"\u003e\u003cspan\u003e\u003cstrong\u003eAudi A6 S-Line C8 Sedan  2019-\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"def\"\u003e\u003cspan\u003e\u003cstrong\u003eAudi A6 S-Line C8 Avant 2019-\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"def\"\u003e\u003cspan\u003e\u003cstrong\u003eAudi S6 C8 Sedan 2019-\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp class=\"def\"\u003e\u003cspan\u003e\u003cstrong\u003eAudi S6 C8 Avant 2019-\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cblockquote\u003eMaxton Design products will not only provide visual enhancement, but will also improve aerodynamics of your car by increasing downforce. We ensure perfect fitment of the product by 3D laser scanning every make and model that we design.\u003cbr\u003e\u003cbr\u003e  \u003c\/blockquote\u003e\n\u003cblockquote\u003e\n\u003cspan\u003eOur parts are made of ABS plastic that is also \u003c\/span\u003e\u003cspan\u003eprimarily \u003c\/span\u003e\u003cspan\u003eused in OEM parts throughout the automotive industry due to its impact, scratch resistance and shock absorbance characteristics. Give you car a new sharp look that will be the envy of all your friends and other drivers. Start your adventure with Maxton Design’s visual tuning that is second to none in unique design and quality. \u003c\/span\u003e\n\u003c\/blockquote\u003e\n\u003ch2 style=\"padding-left: 30px; text-align: center;\"\u003e\u003cb style=\"text-align: center;\"\u003ePRODUCT FEATURES\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul style=\"text-align: center;\"\u003e\n\u003cli style=\"text-align: left;\"\u003eFRONT SPLITTER (FRONT BUMPER LIP) MADE WITH ABS PLASTIC\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eMOUNTING KIT \u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eMOUNTING MANUAL\u003c\/li\u003e\n\n\u003cli style=\"font-weight: 400; text-align: left;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTHIS PRODUCT HAS BEEN TUV (TUV MATERIALGUTACHTEN) CERTIFIED FOR MATERIAL QUALITY\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eTHIS PRODUCT IS TREATED WITH UV PROTECTION COATING\u003c\/li\u003e\n\u003cli style=\"font-weight: 400; text-align: left;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePRODUCT IS READY FOR INSTALLATION AND DOES NOT REQUIRE ADDITIONAL WORK (PREPARATION WORK MAY BE REQUIRED IN CASE OF PAINTING TEXTURED VERSION)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ffffff; background-color: #ff2a00;\"\u003e\u003cb\u003e\u003ci\u003eWe highly recommend installation of all our products with professional auto body shops experienced in installation of visual modifications.\u003c\/i\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":44838599131298,"sku":"AU-A6-C8-SLINE-FD1G+FD1RG","price":383.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/eng_pm_Front-Splitter-V-3-Audi-A6-S-Line-S6-C8-11535_6.png?v=1723496472"},{"product_id":"maxton-design-side-skirts-diffusers-aud-a6-s-line-s6-c8-au-a6-c8-sline-sd1g","title":"Maxton Design Side Skirts Diffusers Audi Sedan \u0026 Avant A6 S-Line \/ S6 C8","description":"\u003cblockquote data-mce-fragment=\"1\"\u003eMaxton Design products will not only provide visual enhancement, but will also improve aerodynamics of your car by increasing downforce. We ensure perfect fitment of the product by 3D laser scanning every make and model that we design.  \u003cbr\u003e\u003cbr\u003e\n\u003c\/blockquote\u003e\n\u003cblockquote data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eOur parts are made of ABS plastic that is also \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eprimarily \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eused in OEM parts throughout the automotive industry due to its impact, scratch resistance and shock absorbance characteristics. Give you car a new sharp look that will be the envy of all your friends and other drivers. Start your adventure with Maxton Design’s visual tuning that is second to none in unique design and quality. \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/blockquote\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eSIDE SKIRT DIFFUSERS MADE OF ABS PLASTIC\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMOUNTING MANUAL\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAVAILABLE IN 3 FINISH STYLES: GLOSS BLACK, TEXTURED BLACK AND CARBON LOOK\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTHIS PRODUCT HAS BEEN TUV (TUV MATERIALGUTACHTEN) CERTIFIED FOR MATERIAL QUALITY\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTHIS PRODUCT IS TREATED WITH UV PROTECTION COATING\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePRODUCT IS READY FOR INSTALLATION AND DOES NOT REQUIRE ADDITIONAL WORK (PREPARATION WORK MAY BE REQUIRED IN CASE OF PAINTING TEXTURED VERSION)\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" ne=\"0.6817348080065233\"\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003eWe highly recommend installation of all our products with professional auto body shops experienced in installation of visual modifications.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0005\/7773\/2663\/files\/AU-A6-C8-SLINE-SD1-DES.png?v=1606169433\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0005\/7773\/2663\/files\/AU-A6-C8-SLINE-SD1-DES.png?v=1606169433\"\u003e\u003cbr\u003e\u003c\/i\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":44838599819426,"sku":"AU-A6-C8-SLINE-SD1G","price":374.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/AU-A6-C8-SLINE-SD1.png?v=1723496497"},{"product_id":"rear-side-splitters-audi-a6-c8-s-line-au-a6-c8-sline-rsd1g","title":"Maxton Design Rear Side Splitters Audi A6 C8 S-Line","description":"\u003ch2 style=\"text-align: center;\"\u003e\n\u003cb\u003ePRODUCT DETAILS \u003c\/b\u003e \u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp\u003ePRODUCT VERSION\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp\u003ePRODUCT CODE\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp\u003eCOMPATIBLE FIT\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd style=\"text-align: center;\"\u003eREAR SIDE SPLITTERS AUDI A6 C8 S-LINE\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp\u003e\u003cstrong\u003eAU-A6-C8-SLINE-RSD1\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003ctd style=\"text-align: center;\"\u003e\n\u003cp class=\"def\"\u003e\u003cstrong\u003e\u003cspan\u003eAudi A6 C8 S-Line 2018 - \u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp class=\"def\"\u003e\u003cspan style=\"color: #ff2a00;\"\u003e\u003cstrong\u003e\u003cstrong class=\"def\"\u003e\u003cspan class=\"def\"\u003eFits only with : AU-A6-C8-SLINE-RS1 \u003c\/span\u003e\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cbr\u003e\u003cbr\u003e\u003cblockquote\u003eMaxton Design products will not only provide visual enhancement, but will also improve aerodynamics of your car by increasing downforce. We ensure perfect fitment of the product by 3D laser scanning every make and model that we design.\u003cbr\u003e\u003cbr\u003e  \u003c\/blockquote\u003e\n\u003cblockquote\u003e\n\u003cspan\u003eOur parts are made of ABS plastic that is also \u003c\/span\u003e\u003cspan\u003eprimarily \u003c\/span\u003e\u003cspan\u003eused in OEM parts throughout the automotive industry due to its impact, scratch resistance and shock absorbance characteristics. Give you car a new sharp look that will be the envy of all your friends and other drivers. Start your adventure with Maxton Design’s visual tuning that is second to none in unique design and quality. \u003c\/span\u003e\n\u003c\/blockquote\u003e\n\u003ch2 style=\"padding-left: 30px; text-align: center;\"\u003e\u003cb style=\"text-align: center;\"\u003ePRODUCT FEATURES\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul style=\"text-align: center;\"\u003e\n\u003cli style=\"text-align: left;\"\u003eREAR SIDE SPLITTERS MADE OF ABS PLASTIC\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eMOUNTING MANUAL\u003c\/li\u003e\n\n\u003cli style=\"font-weight: 400; text-align: left;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003eTHIS PRODUCT HAS BEEN TUV (TUV MATERIALGUTACHTEN) CERTIFIED FOR MATERIAL QUALITY\u003c\/span\u003e\u003c\/li\u003e\n\u003cli style=\"text-align: left;\"\u003eTHIS PRODUCT IS TREATED WITH UV PROTECTION COATING\u003c\/li\u003e\n\u003cli style=\"font-weight: 400; text-align: left;\"\u003e\u003cspan style=\"font-weight: 400;\"\u003ePRODUCT IS READY FOR INSTALLATION AND DOES NOT REQUIRE ADDITIONAL WORK (PREPARATION WORK MAY BE REQUIRED IN CASE OF PAINTING TEXTURED VERSION)\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp style=\"text-align: center;\"\u003e\u003cspan style=\"color: #ffffff; background-color: #ff2a00;\"\u003e\u003cb\u003e\u003ci\u003eWe highly recommend installation of all our products with professional auto body shops experienced in installation of visual modifications.\u003c\/i\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":44838615875746,"sku":"AU-A6-C8-SLINE-RSD1G","price":195.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/eng_pm_Rear-Side-Splitters-Audi-A6-C8-S-Line-11634_5.png?v=1723496952"},{"product_id":"front-splitter-v-2-audi-sedan-avant-a6-s-line-s6-c8-au-a6-c8-sline-fd2g","title":"Maxton Front Splitter V.2 Audi Sedan \u0026 Avant A6 S-Line \/ S6 C8","description":"\u003cblockquote data-mce-fragment=\"1\"\u003eMaxton Design products will not only provide visual enhancement, but will also improve aerodynamics of your car by increasing downforce. We ensure perfect fitment of the product by 3D laser scanning every make and model that we design.  \u003cbr\u003e\u003cbr\u003e\n\u003c\/blockquote\u003e\n\u003cblockquote data-mce-fragment=\"1\"\u003e\n\u003cspan data-mce-fragment=\"1\"\u003eOur parts are made of ABS plastic that is also \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eprimarily \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003eused in OEM parts throughout the automotive industry due to its impact, scratch resistance and shock absorbance characteristics. Give you car a new sharp look that will be the envy of all your friends and other drivers. Start your adventure with Maxton Design’s visual tuning that is second to none in unique design and quality. \u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\n\u003c\/blockquote\u003e\n\u003cul data-mce-fragment=\"1\"\u003e\n\u003cli data-mce-fragment=\"1\"\u003eFRONT SPLITTER (FRONT BUMPER LIP) MADE WITH ABS PLASTIC\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMOUNTING KIT \u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eMOUNTING MANUAL\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eAVAILABLE IN 3 FINISH STYLES: GLOSS BLACK, TEXTURED BLACK AND CARBON LOOK\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003eTHIS PRODUCT HAS BEEN TUV (TUV MATERIALGUTACHTEN) CERTIFIED FOR MATERIAL QUALITY\u003c\/span\u003e\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003eTHIS PRODUCT IS TREATED WITH UV PROTECTION COATING\u003c\/li\u003e\n\u003cli data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\"\u003ePRODUCT IS READY FOR INSTALLATION AND DOES NOT REQUIRE ADDITIONAL WORK (PREPARATION WORK MAY BE REQUIRED IN CASE OF PAINTING TEXTURED VERSION)\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp data-mce-fragment=\"1\"\u003e\u003cspan data-mce-fragment=\"1\" ne=\"0.1390380700572078\"\u003e\u003cb data-mce-fragment=\"1\"\u003e\u003ci data-mce-fragment=\"1\"\u003eWe highly recommend installation of all our products with professional auto body shops experienced in installation of visual modifications.\u003cbr\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0005\/7773\/2663\/files\/AU-A6-C8-SLINE-FD2-DES.png?v=1606170636\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0005\/7773\/2663\/files\/AU-A6-C8-SLINE-FD2-DES.png?v=1606170636\"\u003e\u003cbr\u003e\u003c\/i\u003e\u003c\/b\u003e\u003c\/span\u003e\u003c\/p\u003e\u003cbr\u003e","brand":"Maxton Design","offers":[{"title":"Gloss Black","offer_id":44838619152546,"sku":"AU-A6-C8-SLINE-FD2G","price":383.0,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0527\/9953\/7314\/files\/AU-A6-C8-SLINE-FD2.png?v=1723497030"}],"url":"https:\/\/broxtuning.ca\/collections\/audi-a6-c8-2019-3-0t-v6.oembed","provider":"Brox Tuning","version":"1.0","type":"link"}